TABGSS vs modelled EGT

Pages: 1 2 3 [4]

« previous next »

Author

Topic: TABGSS vs modelled EGT (Read 22482 times)

totti

Full Member

Karma: +15/-29
Offline

Offline

Posts: 227

	Re: TABGSS vs modelled EGT « Reply #45 on: August 19, 2019, 02:43:49 PM »

Quote from: Blazius on August 19, 2019, 12:02:45 PM

Side note: what the hell is that requested boost pressure line..

I don't undestand that software. It requests the maximum boost, but it is running lambda 1 until 3000rpm WOT


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: TABGSS vs modelled EGT « Reply #46 on: August 19, 2019, 03:26:50 PM »

Quote from: totti on August 19, 2019, 02:43:49 PM

I don't undestand that software. It requests the maximum boost, but it is running lambda 1 until 3000rpm WOT

Who even made that soft...

Anyway what is the "point" of this thread. As explained pretty well, BTS is used for EGT temp control or can be used as boost fueling , or it can be used as both in conjunction with lamfa(s4wiki) etc. Do you want to use it or not then?


	Logged

totti

Full Member

Karma: +15/-29
Offline

Offline

Posts: 227

	Re: TABGSS vs modelled EGT « Reply #47 on: August 19, 2019, 04:53:38 PM »

Quote from: Blazius on August 19, 2019, 03:26:50 PM

Currently I'm using BTS for EGT enrichment. A little problem is that at WOT my calculated EGT reach 920C@5200RPM and my lambda goes down to 0.75 beacuse of the enrichment.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: TABGSS vs modelled EGT « Reply #48 on: August 19, 2019, 05:57:02 PM »

Nothing wrong with .75

change it to .8 if you like.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

totti

Full Member

Karma: +15/-29
Offline

Offline

Posts: 227

	Re: TABGSS vs modelled EGT « Reply #49 on: August 20, 2019, 02:31:51 AM »

Quote from: nyet on August 19, 2019, 05:57:02 PM

Nothing wrong with .75

change it to .8 if you like.

I know that it is not wrong. Just a little bit less power and my injectors are running full capacity at high rpm with 0.75 lambda.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: TABGSS vs modelled EGT « Reply #50 on: September 05, 2023, 12:50:43 AM »

Hi,

why is bts triggered in my case at ~710?
TABGBTS is set to 820
FBSTABGM is 0 at 700, 0 at 820, 1 at 860, 1 at 900
KFTATM is stock
TABGSS is set to max value of 1229
i'm on e85 so egt is under 800

shouldnt be related to my dying egt probe


« Last Edit: September 05, 2023, 01:21:14 AM by aef »	Logged

Pages: 1 2 3 [4]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 01:16:24 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search