Pages: [1] 2 3
Author Topic: AUDI TT 1.8T 240HP 8N0906018CA 0010  (Read 18546 times)
IWay
Full Member
***

Karma: +2/-3
Offline Offline

Posts: 143


« on: April 25, 2019, 08:16:50 AM »

Hello,

Anybody got a xdf (TunerPro definition) for the below?

Thanks

AUDI TT 1.8T 240HP 0261208086 375111.bin (size=1048576)

-> Bootrom Version = 05.12
-> EPK = 39/1/ME7.5/5/X505I//24B/P24BL01/270105/
-> Contents of ECUID data table:
   - '0261208086'         (SSECUHN)
   - '1037375111'         (SSECUSN)
   - '8N0906018CA '       (VAG part number)
   - '0010'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
Logged
IWay
Full Member
***

Karma: +2/-3
Offline Offline

Posts: 143


« Reply #1 on: April 25, 2019, 08:42:46 AM »

Or the .KP for WinOls.

Thanks
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #2 on: April 25, 2019, 08:45:36 AM »

Post you bin
Logged
IWay
Full Member
***

Karma: +2/-3
Offline Offline

Posts: 143


« Reply #3 on: April 27, 2019, 10:52:46 AM »

BIN attached
Logged
mdccode5150
Full Member
***

Karma: +11/-4
Offline Offline

Posts: 122


« Reply #4 on: September 06, 2020, 11:35:45 PM »

Do you have the A2L?

It can be imported into WinOLS.

I have it but I believe that it's corrupt.
Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #5 on: September 08, 2020, 01:58:12 AM »

I have it but I believe that it's corrupt.

Witch way to you check it ?
If you share, I can dobble-check, if A2L is realy corrupt or maybe just not fit to 240HP-file
Logged
mdccode5150
Full Member
***

Karma: +11/-4
Offline Offline

Posts: 122


« Reply #6 on: September 18, 2020, 07:06:34 PM »

Witch way to you check it ?
If you share, I can dobble-check, if A2L is realy corrupt or maybe just not fit to 240HP-file

The formatting of the A2L is bad, and to fix it would be a lot of work. How should I up load the file?

 
Logged
mdccode5150
Full Member
***

Karma: +11/-4
Offline Offline

Posts: 122


« Reply #7 on: September 18, 2020, 07:23:59 PM »

PS I just imported into Winols, and the maps look fine! I zipped up with: The A2L, Hex, SGM, BIN, and OLS (all versions). Let me know PM ME or Let me know how to post it.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #8 on: September 19, 2020, 10:05:46 AM »

PS I just imported into Winols, and the maps look fine! I zipped up with: The A2L, Hex, SGM, BIN, and OLS (all versions). Let me know PM ME or Let me know how to post it.

Upload the file on a file hosting website and post the link or when you reply click additional options and you can upload files there but the size is quite limited.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #9 on: October 04, 2020, 09:55:10 AM »

MDC sent this zip to me to post because he could not.

https://mega.nz/file/EN81TKyT#70hOFOoBQHT-Jt_nHbCbS7RwaGuwnepWczmq9fyJyEs
Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #10 on: October 10, 2020, 10:49:11 AM »

MDC sent this zip to me to post because he could not.

https://mega.nz/file/EN81TKyT#70hOFOoBQHT-Jt_nHbCbS7RwaGuwnepWczmq9fyJyEs

Thanks for sharing,

I took a look in the A2L.
This file is not "normal" A2L standart and got a different syntax, so e.g. Vector A2L-editor or CMD-Studio will not open it.
The addresses in A2L seemt to be correct. It can be imported to WinOLS and the maps are correct (only LDRXN and LDRXNZK have wrong start addresses).

If you import into WinOLS, there are no folders, witch are releated to FR.
So this A2L is not ETAS based, more a export of a "what ever" dump-editor..

At this end, you are able to work with A2L or WinOLS, but comparing based on map-name (like it is possible in e.g. CMD-studio) is not possible and you need to re-work differences between BFV and BAM software on your own

BR
Jochen
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #11 on: October 10, 2020, 10:54:24 AM »

Thanks for sharing,

I took a look in the A2L.
This file is not "normal" A2L standart and got a different syntax, so e.g. Vector A2L-editor or CMD-Studio will not open it.
The addresses in A2L seemt to be correct. It can be imported to WinOLS and the maps are correct (only LDRXN and LDRXNZK have wrong start addresses).

If you import into WinOLS, there are no folders, witch are releated to FR.
So this A2L is not ETAS based, more a export of a "what ever" dump-editor..

At this end, you are able to work with A2L or WinOLS, but comparing based on map-name (like it is possible in e.g. CMD-studio) is not possible and you need to re-work differences between BFV and BAM software on your own

BR
Jochen

Thank you but again its not my file I just uploaded, also yes I havent verified it, but if adresses are good then all good, that said I might have a KP for 018ca, will check later.

Also last time i checked , there are only 2-3 maps difference between bfv and 225 hp file via hex compare, could be wrong tho I cant remember.
« Last Edit: October 10, 2020, 10:57:13 AM by Blazius » Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #12 on: October 10, 2020, 01:17:37 PM »

Thank you but again its not my file I just uploaded

Thanks goes to MDC for sharing Wink

(and a little bit to you, for uploading Smiley )



Quote
Also last time i checked , there are only 2-3 maps difference between bfv and 225 hp file via hex compare, could be wrong tho I cant remember.
Witch file do you choose for comparing. 8N0 906 018CB BAM is compleatly off, when you just do a hex compare Sad
Logged
mdccode5150
Full Member
***

Karma: +11/-4
Offline Offline

Posts: 122


« Reply #13 on: October 18, 2020, 09:46:06 AM »

Welcome
Logged
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178



« Reply #14 on: December 18, 2020, 11:44:19 AM »

BIN attached
hey you think you can send me the immo file from this ecu please!!!
Logged

W357
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.059 seconds with 19 queries. (Pretty URLs adds 0.00099999999999999s, 0q)