Pages: [1]
Author Topic: Questions about 0B5/DL501 S-tronic gearbox.  (Read 4037 times)
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« on: May 09, 2019, 08:20:42 AM »

Hi!

I hope someone has some info about what I am looking for.

I wonder if it is possible to retrofit the longitudinal 0B5/DL501 S-tronic gearbox, in say an Audi B5 chassi and with an 1.8t/2.7t engine. Which components do you also need besides the gearbox and TCU?

Steering wheel and shift paddles?
The main shifter?

Does the S-tronic gearbox share the same bolt pattern as the manual 01A/01E/02X/03A gearboxes?

What about the S-tronic half shafts, might they fit the B5 hubs?

When it comes to the TCU and wiring, I can imagine it is gonna be A LOT of work to get everything to work as it should.

The TCU needs specific canbus messages from the ECU?


From Sweden

Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #1 on: May 09, 2019, 08:49:16 AM »

Does the S-tronic gearbox share the same bolt pattern as the manual 01A/01E/02X/03A gearboxes?

What about the S-tronic half shafts, might they fit the B5 hubs?


I'd suggest you first download an SSP about DL501 and look at how it's actually installed in a B8 chassis car before asking all these questions.
Logged

I have no logs because I have a boost gauge (makes things easier)
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)