Pages: 1 2 3 [4]
Author Topic: help me big problem, throttle cut on boost!  (Read 19493 times)
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #45 on: May 29, 2019, 05:29:02 PM »

There is ZERO reason for you to request more than 2550 bar.

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
speedforever
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 25


« Reply #46 on: May 30, 2019, 03:22:49 AM »

There is ZERO reason for you to request more than 2550 bar.



Why? I have 3000 mbar of absolute boost, but by request I don't exceed 2550 mbar, couldn't this be the problem for which the butterfly valve closes?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #47 on: May 30, 2019, 04:51:28 AM »

Why? I have 3000 mbar of absolute boost, but by request I don't exceed 2550 mbar, couldn't this be the problem for which the butterfly valve closes?

if  your boost is above 2550 mbar you have no boost control. This is the limit in ME7.
Logged
speedforever
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 25


« Reply #48 on: May 30, 2019, 06:07:24 AM »

if  your boost is above 2550 mbar you have no boost control. This is the limit in ME7.

I have 4 bar sensor and almost all the boost maps unlocked at 12.5 seconds. Mine, however, is a med 17.1.5 maybe maybe it's a little different.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #49 on: May 30, 2019, 08:08:33 AM »

LOL
Logged

I have no logs because I have a boost gauge (makes things easier)
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)