Pages: [1]
Author Topic: Hi, new here, got some B6 S4 ECU questions  (Read 3010 times)
terry.reese73
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: May 17, 2019, 09:57:21 AM »

I have a spare ECU that has a bad flash on it. I have a stock file and a custom made file sitting on my laptop ready to go on it. not to familiar with using Nefmoto for flashing. should I put the stock file back on it before adding the custom file to it? also, what settings should I have my program on when I do this?

I also have the immobilzer removed on this already.

Thanks in Advance for answering my simple questions.
« Last Edit: May 17, 2019, 11:14:20 AM by terry.reese73 » Logged
terry.reese73
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #1 on: May 17, 2019, 10:03:18 AM »

I also have the VCDS cable and a different cable that we used to flash my stock tune to my normal ECU.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: May 17, 2019, 10:04:54 AM »

There's no point in flashing stock.

If the ECU is busted enough that Nef can't flash it, you'll need bootmode anyway, and whatever is on the ECU doesn't matter.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
terry.reese73
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #3 on: May 17, 2019, 10:36:51 AM »

ok, its not busted, just a bad tune file. I have a corrected one to replace it. Just dont feel like mailing it off to Canada, I have teh correct file on my laptop, just need to learn how to do this on my own for once.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 15 queries. (Pretty URLs adds 0s, 0q)