Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Help with tuning.
Pages: [
1
]
« previous
next »
Author
Topic: Help with tuning. (Read 4791 times)
redg2
Newbie
Karma: +1/-0
Offline
Posts: 8
Help with tuning.
« on: March 03, 2012, 07:45:04 PM »
Im trying to use NOTORIOUS VR'S tune on my a box ecu. I got tuner pro to read the diffrences but i dont know how to swap them over, where do i go from here? Also his tune doesnt have any maf changes, so can i swap over the right for the a box? Sorry newb here trying to learn but nothing really comes back up when i search.
Thanks
Logged
julex
Hero Member
Karma: +79/-4
Offline
Posts: 923
Re: Help with tuning.
« Reply #1 on: March 03, 2012, 08:02:39 PM »
you can simply copy paste the data while having two tuner pros open at the same time. Or when doing a compare.
Logged
redg2
Newbie
Karma: +1/-0
Offline
Posts: 8
Re: Help with tuning.
« Reply #2 on: March 04, 2012, 05:08:16 PM »
thanks for the response, but when i try to open another tuner pro it says that tuner pro is already opened and will not allow me to open up another one...
Logged
julex
Hero Member
Karma: +79/-4
Offline
Posts: 923
Re: Help with tuning.
« Reply #3 on: March 04, 2012, 06:12:12 PM »
correct. but when in TunerPro and you choose "Tools", "Advanced", "New TunerPro instance", it let's you open as many as you desire
Logged
phila_dot
Hero Member
Karma: +173/-11
Offline
Posts: 1709
Re: Help with tuning.
« Reply #4 on: March 04, 2012, 06:45:09 PM »
You cannot use the compare or difference tool in Tunerpro for these two files as they will not both line up to a single definition. Open the A box original with A box definition in one window and NVR's file in another with M box def. Copy MAF table values from MLHFM, KFKHFM, MLOFS from the A box to M box. Done. You will also have to do an engine recode and likely cluster recode.
Logged
redg2
Newbie
Karma: +1/-0
Offline
Posts: 8
Re: Help with tuning.
« Reply #5 on: March 05, 2012, 10:27:18 PM »
this is one thing i was also wobdering about when i look at tye file it shows the ecu as a bosch maf, not a hitachi. wouldnt that mean its already calibrated for a box?? gahhh so confused! thabks for the help guys
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 16, 2024, 03:36:36 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
