Flash 8N0906018S bin onto a 8N0906018C but won't start

Pages: [1]

« previous next »

Author

Topic: Flash 8N0906018S bin onto a 8N0906018C but won't start (Read 4249 times)

TewSlo

Jr. Member

Karma: +7/-7
Offline

Offline

Posts: 45

	Flash 8N0906018S bin onto a 8N0906018C but won't start « on: May 31, 2019, 03:28:44 PM »

Greetings,

Correct me if I'm stupid. Got a notification on my phone for a 8N0906018C (512kb flash) for $25 on eBay. Of course I bought it. My car is a 8N0906018S (512kb flash). So, I plugged this bad larry into my car and flashed a bin I ripped off of my current working ECU. Flash is successful but the car simply will not start (turns over will not fire). It's a 2000 Quattro 180 so it utilizes IMMO I. The ECU currently in the car was also purchased from eBay (a 8N0906018S) and was literally plug and play without issue or VCDS needed for it to start. The ECU boards look the same, so what is it that would keep me from utilizing this as a backup ECU?

Thanks in advance!


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #1 on: June 01, 2019, 04:28:44 AM »

imm off both. Its possible 018 C is immo 2.


	Logged

aleks19411

Full Member

Karma: +4/-4
Offline

Offline

Posts: 60

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #2 on: June 05, 2019, 12:09:10 PM »

Quote from: brad2192 on May 31, 2019, 03:28:44 PM

checksums counted?


	Logged

TewSlo

Jr. Member

Karma: +7/-7
Offline

Offline

Posts: 45

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #3 on: June 06, 2019, 11:19:31 AM »

Of course! (Edit: Well, now that I think about it the ME7Check program is probably correcting checksums for the 018S. Would the 018C have different checksums? If so, how would I fix this?)


« Last Edit: June 06, 2019, 11:49:07 AM by brad2192 »	Logged

aleks19411

Full Member

Karma: +4/-4
Offline

Offline

Posts: 60

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #4 on: June 06, 2019, 12:20:28 PM »

Quote from: brad2192 on June 06, 2019, 11:19:31 AM

Of course! (Edit: Well, now that I think about it the ME7Check program is probably correcting checksums for the 018S. Would the 018C have different checksums? If so, how would I fix this?)

read the error code in the engine ecu and the dashboard to make sure that the code is missing. What was the program flashing?


	Logged

TewSlo

Jr. Member

Karma: +7/-7
Offline

Offline

Posts: 45

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #5 on: June 06, 2019, 06:03:24 PM »

Using Nefmoto and verified checksums, my 018S ECU works fine with this method. There is not codes populating other than ECU voltage which i typically clear, happens every time I swap ECU


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #6 on: June 06, 2019, 06:10:50 PM »

Quote from: brad2192 on June 06, 2019, 11:19:31 AM

the ME7Check program is probably correcting checksums for the 018S

ME7Check does not correct checksums.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: Flash 8N0906018S bin onto a 8N0906018C but won't start « Reply #7 on: June 06, 2019, 06:24:24 PM »

me7sum corrects checks, its next to me7check.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 06:53:04 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search