Pages: [1]
Author Topic: Cant read cable  (Read 1412 times)
Nickcc123
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: June 14, 2019, 12:35:09 PM »

I have Hex - Can cable from ross-tech. I updated my d2xx drivers also dont have it boot in intelligent mode. tried refreshing devices in nefmoto and still no luck reading the cable. Any help is appreciated! 
Logged
ulek3pl
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 55


« Reply #1 on: June 23, 2019, 05:50:52 AM »

I have ori and also dont work. In my case only china cables work fine.
Logged
dilly
Full Member
***

Karma: +7/-19
Offline Offline

Posts: 215



« Reply #2 on: August 26, 2019, 11:04:16 PM »

you need to install the correct drivers.
both my china cable and rosstech cable work perfectly fine

Logged
nyet
Administrator
Hero Member
*****

Karma: +440/-60
Online Online

Posts: 10025


WWW
« Reply #3 on: August 27, 2019, 08:25:41 AM »

The latest "direct usb" drivers from ross tech do not work. Try the older USB drivers or the VCP drivers.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
birchbark506
Sr. Member
****

Karma: +6/-9
Offline Offline

Posts: 378


« Reply #4 on: August 31, 2019, 11:51:27 AM »

I installed the old driver with vcp, then followed the steps on Ross tech site and then Manually installed the port driver as website. And then used me7eeprom to read by odb
Logged
dilly
Full Member
***

Karma: +7/-19
Offline Offline

Posts: 215



« Reply #5 on: September 04, 2019, 08:27:20 PM »

i have two china cables. one ftdi from ebay and a hex+can vcds cable from china. has full version of vcds with updates lol 20$
both work flawlessly in nefmoto. i use the ftdi cable to read eeprom and what not in other programs
+ i think it uses the legit drivers too
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)