NefMoto > Technical > Tuning > KRKATE target boost effects
Pages: 1 [2]
« previous next »
Author Topic: KRKATE target boost effects  (Read 8803 times)
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1420
« Reply #15 on: June 19, 2019, 03:01:34 AM »
Quote from: Blazius on June 19, 2019, 01:26:58 AM
Solenoids should never run above 95% DC, this is the same with injectors etc. Simple electrical stuff, if you run them at 100% dc a lot, intentionally or unintentionally sooner or later its going to fail.
Do you have any evidence to prove that? Why is that? I am in elektronics more than decade and first time I read this. That solenoid can run on 95%, but 100% will kill him. Maybe I am wrong, but i want to know why
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #16 on: June 19, 2019, 09:06:38 AM »
Because it is an inductor and you don't run a DC voltage source through an inductor. 95% provides a natural current limiter because it is an AC source.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1420
« Reply #17 on: June 19, 2019, 11:54:05 AM »
At high frequency that is true, but N75 is feed by 10-15 Hz?  
At that frequency coil must be huge like house to provide curent limit
« Last Edit: June 19, 2019, 11:56:06 AM by BlackT » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #18 on: June 19, 2019, 07:14:40 PM »
Quote from: BlackT on June 19, 2019, 11:54:05 AM
At high frequency that is true, but N75 is feed by 10-15 Hz?  
At that frequency coil must be huge like house to provide curent limit

hm. Good point actually.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5839
« Reply #19 on: June 21, 2019, 06:02:31 AM »
Quote from: BlackT on June 19, 2019, 11:54:05 AM
At high frequency that is true, but N75 is feed by 10-15 Hz?  
At that frequency coil must be huge like house to provide curent limit

Actually more like 30hz.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
STEVEPHILP
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 70
« Reply #20 on: June 23, 2019, 12:30:09 AM »
Volvo ME7 sets DC limit at 100 and target 100 regularly - from factory.
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 23, 2024, 06:42:57 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 16 queries. (Pretty URLs adds 0s, 0q)