Pages: [1]
Author Topic: Audi A5 Quattro 8K5907115  (Read 5004 times)
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« on: June 26, 2019, 10:20:37 AM »

Could anyone help me find LDRXN in this file?
I've been trying for days but I have not found it.

Thanks for any assistance.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: June 26, 2019, 07:09:47 PM »

you have not found it because its not in this software.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070


« Reply #2 on: June 27, 2019, 12:52:36 AM »

LOL
Logged

I have no logs because I have a boost gauge (makes things easier)
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #3 on: June 27, 2019, 05:06:54 AM »

LOL

I'm sorry for not being born knowing, in the next incarnation I'm going to ask this gift to God
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #4 on: June 27, 2019, 05:08:40 AM »

you have not found it because its not in this software.

Is this ECU driven by torque instead of air mass?
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #5 on: June 27, 2019, 05:13:23 AM »

I was trying to put together a map packet for this ECU based on 8K2907115L
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #6 on: June 27, 2019, 05:31:24 AM »

it has ldrxn type map, but not specifically "ldrxn".

if you are knowledgeable enough to tune this software, then you should be able to find correct type mapping without issue.

8k2 is the older firmware version of this. 8k5 is newer and a bit more complex. really not a good comparison.

(8k5 is flexfuel firmware).
« Last Edit: June 27, 2019, 05:34:29 AM by k0mpresd » Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #7 on: June 27, 2019, 07:06:22 AM »

it has ldrxn type map, but not specifically "ldrxn".

if you are knowledgeable enough to tune this software, then you should be able to find correct type mapping without issue.

8k2 is the older firmware version of this. 8k5 is newer and a bit more complex. really not a good comparison.

(8k5 is flexfuel firmware).

Thank you very much for your explanation.
participation is of great value for this forum.
Logged
l3v1athan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #8 on: February 23, 2024, 05:57:03 AM »

Thank you very much for your explanation.
participation is of great value for this forum.

Any chance you came right with this? I'm sitting in the same predicament and don't want to start fiddling with maps that seem right meanwhile I'm completely off. I've seen there's a few to the left of where LDRXN should be, is this what I should be aiming for? Or is it like the other randoms maps that are completely in different positions compared to the 8K2
« Last Edit: February 27, 2024, 01:45:29 AM by l3v1athan » Logged
eg4
Jr. Member
**

Karma: +3/-2
Offline Offline

Posts: 27


« Reply #9 on: February 23, 2024, 10:18:15 AM »

Any chance you came right with this? I'm sitting in the same predicament and don't want to start fiddling with maps that seem right meanwhile I'm completely off. I've seen there's a few to the left of where LDXRN should be, is this what I should be aiming for? Or is it like the other randoms maps that are completely in different positions compared to the 8K2

its after after kfmiop
Logged
l3v1athan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #10 on: February 24, 2024, 11:33:14 AM »

its after after kfmiop

Are you talking about KFMIRL? Or further on? Seen other similar shaped maps but the values aren't making much sense. Am I looking for 1D or 2D map? The help is much appreciated
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)