Pages: [1]
Author Topic: Looking for an MED17.1.1 FR - English  (Read 512 times)
turboegt
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6


« on: July 12, 2019, 05:27:50 PM »

Anyone have one?

I’m tuning via HPTuners, and am looking to understand the PCM order of operations a bit better.
Logged
IamwhoIam
Hero Member
*****

Karma: +24/-36
Offline Offline

Posts: 697


« Reply #1 on: July 13, 2019, 02:40:37 AM »

Oh wait, I though HPTuners had understood everything before releasing new ECU types out there Cheesy
Logged

I have no logs because I have a boost gauge (makes things easier)
jcsbanks
Full Member
***

Karma: +7/-0
Online Online

Posts: 83


« Reply #2 on: July 13, 2019, 05:00:07 AM »

Can you edit binaries with HP Tuners or are you in a walled garden editor?
Logged
turboegt
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6


« Reply #3 on: July 13, 2019, 12:45:43 PM »

Oh wait, I though HPTuners had understood everything before releasing new ECU types out there Cheesy

They do. 

I don’t.

They provide a tool.  It’s on the person who utilizes the tool to understand what they’re doing, and how the changes they’re making affect the order of operations.

Which... is why I would like to get ahold of FR.

I calibrate a wide range of vehicles.  Most of which are VE, and PE based.

HPTuners works for me, so i use it.
Logged
turboegt
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6


« Reply #4 on: July 13, 2019, 12:49:18 PM »

Can you edit binaries with HP Tuners or are you in a walled garden editor?

Somewhere in between.

If you need something that’s not in the software, you message support, and they’ll change it for you.  Turn around takes about 3-7 days on average.

I’m not a programmer by trade.  I don’t speak Binary, Hex, or have any desire to do so so it works for me.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)