Pages: [1]
Author Topic: 018CH looking to code out airbag module and crash sensor  (Read 2283 times)
Cadensdad14
Full Member
***

Karma: +8/-1
Offline Offline

Posts: 134


« on: July 21, 2019, 05:41:50 PM »

So i have a B5 1.8t running a CH box.  Vehicle is a dedicated rally car and is stripped inside of everything excessive.  This includes the removal of the airbag control module and crash sensor.  Im throwing a code for missing signals from these.  I have found 8 CW_CAN_R in my coding and have subtracted 8, or binary 1000 from all of them.  Ive also found the only CW_CAN_C and it has a value of 5.  or 0101, and the airbag shouldnt be involved in that, just gearbox and brakes.

Is there an area of the ESKONF that deals with the airbags?  Or could the can coding be different on me7.5 than it is on me7.1?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)