Pages: [1]
Author Topic: Wideband error and P0130 code  (Read 493 times)

Karma: +1/-0
Offline Offline

Posts: 13

« on: July 26, 2019, 09:37:06 PM »

Hi everone, Im having some issues with my 1.8T awp, i delete the rear O2, but few days ago the car started with some fueling problems, I made some volt reading on the O2 connector with the switch in ignition de pin #5 in the ecu drops the ground to 9V if I measure pin #5 to Battery positive it gets 12v but drops to 9v when ignition. Can I put the heater of the O2 directly to battery ground and 12v?

« Last Edit: July 26, 2019, 09:53:12 PM by davgeek » Logged
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)