Pages: [1]
Author Topic: Me7 logger - Item that can be logged  (Read 768 times)

Karma: +2/-0
Offline Offline

Posts: 14

« on: August 02, 2019, 02:34:06 AM »

I am trying to work out why Requested load is higher than LDRXN.

As part of this I would like to log data from the calculation Rlsol to Plsol. But there are item that cant be logged in ME7 logger so working out what is effecting the outcome calculation for Plsol is impossible.

Q. Can these items be added into Me7 logger and if so how?


Hero Member

Karma: +446/-63
Online Online

Posts: 10289

« Reply #1 on: August 02, 2019, 03:22:07 AM »

You have to use a disassembler to find RAM locations.

for 2.7t mbox, examples are the torque_ and extra_ files:

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Sr. Member

Karma: +10/-1
Offline Offline

Posts: 324

« Reply #2 on: September 28, 2019, 11:19:20 AM »

Q. Can these items be added into Me7 logger and if so how?

You can. You just need to change(or add) offset, name, factor, mask in .ecu file.

;Name           , {Alias}                           , Address, Size, Bitmask, {Unit},    S, I,            A,      B, Comment
afnmn           , {}                                , 0x383301,  1,  0x0000, {rpm}     , 0, 0,           40,      0, {Bereichsfenster Aussetzer, minimale Drehzahl}
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)