edit wrong screen shot 

sup all. working on a manual converted c5 s6 usdm and im having an issue trying to find the location of TEV AKA N80. ive found the locations of N112, J299, LSHHK2, LSHHK1, N115. i figured i ask before i spend a few hours threw trial and error. attached is location of eskonf and the stock file thanks  
0
1
2
3 XX XX XX J299
4 XX N112 XX XX
5 LSHHK2 XX XX XX
6 XX N115 LSHHK1 XX
7
8
9
10
11
12

I've compiled this from the information available on this forum.

I can confirm that they are correct, though lacking Ignition Coil mapping.
So far these pairs have been correct for both euro S6 and euro S8 manual files.

ME7.1.1 bit pairs (IGNITION COILS NOT MAPPED)

Byte  0: EV1   TEV     N144   EV8
Byte  1: N145   XX     EV5   EV4
Byte  2: XX        XX     XX           XX
Byte  3: XX        XX      XX          SLP
Byte  4: NWS1    SLV     NWS2   EV3
Byte  5: B2S2   EV6      XX?   XX
Byte  6: XX       N115?  B1S2   XX      COULD ALSO BE:    Byte 6: XX     BKV     B1S2        XX
Byte  7: XX       XX       XX          XX
Byte  8: XX       XX     XX           XX
Byte 10: XX      XX     XX           XX
Byte 11: XX      XX       XX          XX
Byte 12: XX      EV7     XX          EV2