Pages: [1]
Author Topic: Bench setup - boot mode  (Read 5554 times)
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« on: August 20, 2019, 05:22:59 AM »

I had bought my bench setup a few years ago, but was never very successful in boot mode ECU.
Since about a year, I don't think I was ONCE able to get into boot mode.

Tried various cables, including exact same others have used successfully.

Can someone sell me a working bench setup? Or check/fix/rebuild mine?
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 189



WWW
« Reply #1 on: August 20, 2019, 10:08:20 AM »

Make yours. I bought the connectors on aliexpress (ECU and OBDII), and made the hardness using an 12V@2A power supply.
Logged

Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« Reply #2 on: August 20, 2019, 10:21:20 AM »

Make yours. I bought the connectors on aliexpress (ECU and OBDII), and made the hardness using an 12V@2A power supply.

Not good with those darn pins.

I DO HAVE one, but suspect not working anymore. Bought from Nelson IIRC. Have power supply, the connectors (ECU, OBD2, etc). Just prefer someone to either redo (and check that it works) or at least test/verify. Or simply buy one from someone.
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 189



WWW
« Reply #3 on: August 20, 2019, 01:21:18 PM »

I used to have an Aliexpress link with an ready harness, but I didnt found now Sad.
Logged

Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)