MAF Scalling 60mm>70mm

Pages: [1]

« previous next »

Author

Topic: MAF Scalling 60mm>70mm (Read 3544 times)

marto7

Full Member

Karma: +1/-1
Offline

Offline

Posts: 67

	MAF Scalling 60mm>70mm « on: August 22, 2019, 09:59:16 AM »

Hello.The car is 2005 Audi B7 A4 1.8TQ.Im planning to proper scale my maf because i went from 60 to 70mm housing before year and the mapper not scale it right.The turbo is k04-064 and the max value for max that i saw on logs is 180g.For that turbo is too low. On TunerPro or WinOls better ? i will scale original Housing than ill trasnfer the map to the last file that i have for me setup. Can somebody tell me how to calculate it right. Thanks


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: MAF Scalling 60mm>70mm « Reply #1 on: August 22, 2019, 10:04:04 AM »

http://nefariousmotorsports.com/forum/index.php?topic=4839


	Logged

marto7

Full Member

Karma: +1/-1
Offline

Offline

Posts: 67

	Re: MAF Scalling 60mm>70mm « Reply #2 on: August 22, 2019, 10:27:55 AM »

Quote from: BlackT on August 22, 2019, 10:04:04 AM

http://nefariousmotorsports.com/forum/index.php?topic=4839

This is the first thing that i tried but im still receiving error in the console - error: cannot find MLHFM / MSHFMTP, please specify offset!

If i type 0x10D72 after the 60 70, Im receiving this message:


	Logged

fknbrkn

Hero Member

Karma: +186/-24
Offline

Offline

Posts: 1461

mk4 1.8T AUM

	Re: MAF Scalling 60mm>70mm « Reply #3 on: August 22, 2019, 12:27:48 PM »

You do not post your file or sw

What did you expect?


	Logged

marto7

Full Member

Karma: +1/-1
Offline

Offline

Posts: 67

	Re: MAF Scalling 60mm>70mm « Reply #4 on: August 22, 2019, 12:40:59 PM »

Sorry for that.Thats it:
First is when the car was only tuned with stock Hardware.
LAST - thats what the car run on now.


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: MAF Scalling 60mm>70mm « Reply #5 on: August 22, 2019, 02:46:00 PM »

your adress is wrong

Code:

C:\Users\Audi>mafadjust HEEDFirst.Bin 60 70 0x143e0

increasing MLHFM with 36.11% from 1005.6kg/h -> 1368.7333333333kg/h
increasing done, generating output
starting to write results to Binary File HEEDFirst_mod.bin
starting to write result to ClipBoard File HEEDFirst_mod.txt
done!


	Logged

marto7

Full Member

Karma: +1/-1
Offline

Offline

Posts: 67

	Re: MAF Scalling 60mm>70mm « Reply #6 on: August 22, 2019, 03:21:05 PM »

Yes, with this adress it worked, but how did you get it ? In WinOls i saw this adress for maf - 14580. Do i have wrong mappack for MAF ?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

December 03, 2024, 02:16:55 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search