Pages: [1]
Author Topic: MAF Scalling 60mm>70mm  (Read 3133 times)
marto7
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 67



« on: August 22, 2019, 09:59:16 AM »

Hello.The car is 2005 Audi B7 A4 1.8TQ.Im planning to proper scale my maf because i went from 60 to 70mm housing before year and the mapper not scale it right.The turbo is k04-064 and the max value for max that i saw on logs is 180g.For that turbo is too low. On TunerPro or WinOls better ? i will scale original Housing than ill trasnfer the map to the last file that i have for me setup.  Can somebody tell me how to calculate it right. Thanks
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #1 on: August 22, 2019, 10:04:04 AM »

http://nefariousmotorsports.com/forum/index.php?topic=4839
Logged
marto7
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 67



« Reply #2 on: August 22, 2019, 10:27:55 AM »


This is the first thing that i tried but im still receiving error in the console - error: cannot find MLHFM / MSHFMTP, please specify offset!

If i type 0x10D72 after the 60 70,  Im receiving this message:
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #3 on: August 22, 2019, 12:27:48 PM »

You do not post your file or sw

What did you expect?
Logged
marto7
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 67



« Reply #4 on: August 22, 2019, 12:40:59 PM »

Sorry for that.Thats it:
First is when the car was only tuned with stock Hardware.
LAST - thats what the car run on now.

Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #5 on: August 22, 2019, 02:46:00 PM »

your adress is wrong
Code:
C:\Users\Audi>mafadjust HEEDFirst.Bin 60 70 0x143e0

increasing MLHFM with 36.11% from 1005.6kg/h -> 1368.7333333333kg/h
increasing done, generating output
starting to write results to Binary File HEEDFirst_mod.bin
starting to write result to ClipBoard File HEEDFirst_mod.txt
done!


Logged
marto7
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 67



« Reply #6 on: August 22, 2019, 03:21:05 PM »

Yes, with this adress it worked, but how did you get it ? In WinOls i saw this adress for maf - 14580. Do i have wrong mappack for MAF ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)