Pages: [1]
Author Topic: 16985 - Internal control module memory - checksum error) in VAG 1.8T with ME7.5?  (Read 416 times)
ulek3pl
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 55



Hello! I get car with germany "stage1" mtm. Car runs like crap. I read flash with mpps (i cant with nefmoto cause memory layout), but i cant write. I remove ecu from engine bay and i see this have crypt adapter. I desolder this adapter and solder flash (29f800at). I think it must be 29f800bb. I flash ori file but car have 16985 - Internal control module memory - checksum error). I tried galletto and mpps. I tried checksum with me7check and with Winols. Same result... Any ideas?
Logged
aef
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 1150



check your "ori" file with me7check
try with another eeprom
Logged
ulek3pl
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 55



Check sum is ok, i check it with nefmoto check before write. Tune file without adapter too have error, with adapter is no dtc..
Logged
nyet
Administrator
Hero Member
*****

Karma: +440/-60
Offline Offline

Posts: 10014


WWW

Post ori.

There is no "nefmoto check"
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ulek3pl
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 55



solved, i change 29f800ta to ori 29f800bb.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)