NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > S4 b5 2.7T table question
Pages: [1]
« previous next »
Author Topic: S4 b5 2.7T table question  (Read 3309 times)
mophk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« on: September 01, 2019, 06:55:59 PM »
hey, Im trying to find VARTAB in the 8d0 551M file. It seems that the coding table has a value every few bytes, at first glance it seems to be 8? could this be a table or is there any defined one?



anyone could chip in a dime?
Im well aware of comparing me7.1 vs me7.1.1 file. its just for "am i seeing things?" purposes.

Please note that the table would be huge as there are a lot of emission related codding
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #1 on: September 01, 2019, 11:13:23 PM »
M box is fully defined..
Logged
mophk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #2 on: September 02, 2019, 12:32:51 AM »
Quote from: Blazius on September 01, 2019, 11:13:23 PM
M box is fully defined..

it seems it is not. the german OLS file has a lot of tables, but does not have VARTAB. this is a thing as per rs4 file topic

unless there is another yet better file then i would be super happy to get it
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #3 on: September 02, 2019, 12:38:15 AM »
551M is definitely far from fully defined.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
mophk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #4 on: September 02, 2019, 12:56:31 AM »
the thing im looking for is the least important thing i can image so its fine. ill probably try to change one coding to 10715 in the file to hopefully get it working. as its not allowed by the file right now and changing the vardef to 10715 leads to ecu having 4611 coding after the flash
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #5 on: September 02, 2019, 02:08:43 AM »
Quote from: mophk on September 02, 2019, 12:32:51 AM
it seems it is not. the german OLS file has a lot of tables, but does not have VARTAB. this is a thing as per rs4 file topic

unless there is another yet better file then i would be super happy to get it

Yeah, well "fully" defined for tuning I guess, and AFAIK barerly any public DAMOS is official, had a look in the 2015 dump maybe ?
Logged
mophk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #6 on: September 02, 2019, 02:24:48 AM »
Quote from: Blazius on September 02, 2019, 02:08:43 AM
Yeah, well "fully" defined for tuning I guess, and AFAIK barerly any public DAMOS is official, had a look in the 2015 dump maybe ?

from the sticky thread? yeah. ive even checked few other damos from rs4 etc to maybe see what does the table look like. finding the data does not seem to be too hard but creating an actual table is beyond me. for now.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 10:23:32 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)