Pages: [1]
Author Topic: try to immo defeat old me7 with siemens cpu  (Read 4124 times)
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« on: September 04, 2019, 06:15:36 PM »

there is a easiest way to immo defeat old bosch me7 with siemens cpu ? I'm sure argdubstool will only work on infinition c167 cpu.

do I need to desolder 95040 and chip burner it ? or someone have a bootmode tool for it ?



« Last Edit: September 04, 2019, 06:18:05 PM by jogtx16v » Logged
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #1 on: September 11, 2019, 06:01:16 PM »

TTT
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #2 on: September 12, 2019, 03:50:14 AM »

Have you tried to bootmode it?
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1419



« Reply #3 on: September 15, 2019, 09:25:22 AM »

Yust read it via boot mode. Tool you have here on forum me7eeprom
Logged
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #4 on: October 17, 2019, 06:23:59 PM »

this ecu is 06A 906 032 C

a friend give me that ecu to make immo delete but seem already immo off.

I Also discovered this ecu have neuspeed sticker on 29F400BB chip. the car no start with this ecu.

I successfully Read eeprom with willem programmer.

I notice in this file I have some checksum issue but no deathcode are active.

thank for helping me
Logged
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #5 on: October 18, 2019, 04:25:27 PM »

eeprom in attachement
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0s, 0q)