Buddy needs an ECU for a wideband conversion, I have a wideband ME7.5 ECU upstairs but it's from an Audi 1.8T and he has a jetta.. Other than the metal body of the ECU being slightly different, will an Audi ME7.5 ECU work in his jetta as long as I disable immo on eeprom and write a tune with a base file compatible with his jetta? He has an 01 jetta with narrowband 032CL ecu, he wants 2-step and anti-lag (who the fuck doesn't lately.. It's getting so played out.. Holy shit..) So I told him to do a wideband conversion on his harness and I'd supply him with an ECU.. I'm thinking once he has the harness and wideband o2 sensor installed I would provide him with this ECU I have and then flash a 032DL file onto in (for AWW engine) and all should be well..

Does this all sound like it will work? Thank you.

Umm... You know you can add 2 step to the cl file fwiw. To do the wideband conversion you need to install a lsu4.2 wideband sensor and run the 2 extra wires to the ecu. Delete vvt in project configuration, and in eskonf. Cool over mad offset table as the sensor element isn't the same. Copy over all the boost control maps as they are not the same and also the injector data

Please don't recommend this to people who can't ASM, the NLS/LC thread is already enough of a shitshow.

They are a different part number and the offsets need to be ported or it's like 10-12% off

Cause probably the housing and the element is not the same( if you only swapped the element not the housing)

All the mafs I swapped out were complete mafs, never bothered removing elements

Sent from my SM-G955F using Tapatalk