1.8t aum immo problem after flashing

Pages: [1]

« previous next »

Author

Topic: 1.8t aum immo problem after flashing (Read 3756 times)

MichVu

Newbie

Karma: +0/-3
Offline

Offline

Posts: 8

	1.8t aum immo problem after flashing « on: September 11, 2019, 04:05:23 PM »

Hello guys,
So i decided to change my 150 flash file to the 180 one from auq with mpps
I made backup without the problems as well as instaling auq flash file.
The problem ocured when i started the car, runs like for a few seconds and goes out bcouse of immo, any ideas ? Wink

Ps. Sorry if i posted thread in wrong place, im new here Wink


	Logged

_nameless

Hero Member

Karma: +320/-448
Offline

Offline

Posts: 2671

	Re: 1.8t aum immo problem after flashing « Reply #1 on: September 11, 2019, 04:12:02 PM »

Immo2 vs immo 3. Flash s immo off Eeprom to the 95040


	Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/

MichVu

Newbie

Karma: +0/-3
Offline

Offline

Posts: 8

	Re: 1.8t aum immo problem after flashing « Reply #2 on: September 11, 2019, 04:18:43 PM »

Quote from: Marty on September 11, 2019, 04:12:02 PM

Immo2 vs immo 3. Flash s immo off Eeprom to the 95040

Can you explain me clearly Cheesy

? Im total newbie
Guess i have immo3 couse immo 2 was in early g4 releases i have swap from 2k4 gti


	Logged

fknbrkn

Hero Member

Karma: +177/-18
Offline

Offline

Posts: 1401

mk4 1.8T AUM

	Re: 1.8t aum immo problem after flashing « Reply #3 on: September 11, 2019, 06:41:32 PM »

You should use flash from engine with immo3
Now its time to bootmode cos you wont be able to flash it via obd due to immo mismatch


	Logged

MichVu

Newbie

Karma: +0/-3
Offline

Offline

Posts: 8

	Re: 1.8t aum immo problem after flashing « Reply #4 on: September 11, 2019, 06:44:09 PM »

Quote from: fukenbroken on September 11, 2019, 06:41:32 PM

You should use flash from engine with immo3
Now its time to bootmode cos you wont be able to flash it via obd due to immo mismatch

But i uploaded backup flash with no problems twice( couse tried two difrent auq flashes) and the car works fine.


	Logged

Shocerote

Jr. Member

Karma: +1/-2
Offline

Offline

Posts: 42

	Re: 1.8t aum immo problem after flashing « Reply #5 on: November 04, 2019, 09:57:24 PM »

Quote from: MichVu on September 11, 2019, 04:05:23 PM

Ps. Sorry if i posted thread in wrong place, im new here Wink

ok now

you have immo2 vs immo3 you need to immo off that ecu to make it work
paste your eeprom here so I can help you!!
you will need bootmode harness to do that!! lmk


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 16, 2024, 03:12:42 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search