How is coil dwell calculated? Is there a table for this?

Pages: 1 [2]

« previous next »

Author

Topic: How is coil dwell calculated? Is there a table for this? (Read 17242 times)

ta79pr

Full Member

Karma: +4/-0
Offline

Offline

Posts: 103

	Re: How is coil dwell calculated? Is there a table for this? « Reply #15 on: March 16, 2012, 03:27:51 AM »

Could it be that the system has the ability, but it is simply not applied anywhere we see because it is only utilized in direct injection systems?


	Logged

02 TT tdi (BEW)
2005 allroad 2.7tM (BEL)

jibberjive

Hero Member

Karma: +23/-2
Offline

Offline

Posts: 536

	Re: How is coil dwell calculated? Is there a table for this? « Reply #16 on: March 16, 2012, 07:12:39 AM »

I like the direction this is going. BTW, I might be waterjet cutting my own coil adapter plates, and might consider doing a bunch of them at the same time to hook some fellow NefMoto'ers up, if you guys would be interested.


	Logged

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: How is coil dwell calculated? Is there a table for this? « Reply #17 on: March 16, 2012, 10:26:57 AM »

Quote from: phila_dot on March 15, 2012, 08:44:57 PM

Also, does anyone know the purpose of subfunction zuesz-band?
It's output to AZUE as well, but it's inactive due to CW-FUBND=0.

multi-spark ignition (multiple sparks per one cylinder ignition)


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: How is coil dwell calculated? Is there a table for this? « Reply #18 on: March 16, 2012, 11:17:08 AM »

Quote from: elRey on March 16, 2012, 10:26:57 AM

multi-spark ignition (multiple sparks per one cylinder ignition)

Yea, another quick glance this morning revealed "ME7 is configured for single spark and dual spark output".


	Logged

masterj

Hero Member

Karma: +62/-5
Offline

Offline

Posts: 1049

	Re: How is coil dwell calculated? Is there a table for this? « Reply #19 on: March 16, 2012, 01:06:05 PM »

Quote from: nehalem on March 13, 2012, 04:22:23 PM

i can't answer this, but i did just complete the 2.0t ignition coil conversion. the car has never, not matter what I've done to it or how it's been tuned, been this smooth. i highly highly recommend doing the conversion or buying the 034 kit... i can't wait to check my gas mileage after 1000 miles.

Any tutorials how to do the 2.0t conversation? Wink


	Logged

ME7Tuner Wizard

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: How is coil dwell calculated? Is there a table for this? « Reply #20 on: March 16, 2012, 01:17:32 PM »

Quote from: phila_dot on March 16, 2012, 11:17:08 AM

Yea, another quick glance this morning revealed "ME7 is configured for single spark and dual spark output".

Have you bothered to look closer at AZUE function notes? The more I look at it the more I hold to my previous statement.


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: How is coil dwell calculated? Is there a table for this? « Reply #21 on: March 16, 2012, 02:07:25 PM »

Quote from: elRey on March 16, 2012, 01:17:32 PM

Have you bothered to look closer at AZUE function notes? The more I look at it the more I hold to my previous statement.

Yea, I just got to the part that resembled what you were saying, but I had to run. I'm gonna have another look later.


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: How is coil dwell calculated? Is there a table for this? « Reply #22 on: March 16, 2012, 03:03:37 PM »

It looks like the maps I listed are for igniton range 1 (low engine speed). There is a hard switch to ignition range 2 when engine speed crosses the threshold SY_NZUEB.

It looks like the code is there for dual spark ignition. What pros and cons are there for this and what hardware changes would be required?


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: How is coil dwell calculated? Is there a table for this? « Reply #23 on: March 16, 2012, 10:46:59 PM »

Quote from: phila_dot on March 16, 2012, 03:03:37 PM

It looks like the code is there for dual spark ignition. What pros and cons are there for this and what hardware changes would be required?

It looks like this can be implemented without any hardware changes and could really benefit E85 cold starts at least.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 10:57:21 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search