Pages: [1]
Author Topic: 1.8t aum me7.5 flash compatibility  (Read 2903 times)
MichVu
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 8



« on: September 13, 2019, 02:27:10 AM »

Hello guys so id like to increas at start my 150hp engine to 180hp before actual remaping for stage 2
The question is witch auq flash will be compatible with mine and none of problems will ocure like immo etc. (Iff immo problem will ocure do i have to addapt it wih vcds ?)
Bosh hardware number:0261206887
Bosh software number:1037360272
Vw software number:06A906032DR 0003
Thanks in advance Wink
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #1 on: September 13, 2019, 07:35:37 AM »

There was a thread for this yesterday.  Your answer is no.
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 282


« Reply #2 on: September 13, 2019, 08:05:13 AM »

Hello guys so id like to increas at start my 150hp engine to 180hp before actual remaping for stage 2
The question is witch auq flash will be compatible with mine and none of problems will ocure like immo etc. (Iff immo problem will ocure do i have to addapt it wih vcds ?)
Bosh hardware number:0261206887
Bosh software number:1037360272
Vw software number:06A906032DR 0003
Thanks in advance Wink

no any problem flash auq binary just need correct one
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0.007s, 0q)