Pages: [1] 2
Author Topic: Stage 2 AWP to Auq  (Read 633 times)
jlap1990
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« on: October 03, 2019, 10:30:52 PM »

Hello guys, I want to make this file compatible to use on a AUQ Seat leon 1.8t, the original file is from a stage 2 Awp gti

someone can help me out?

I want to edit injector size to 386cc and k04 turbo compatibility

this tune have pops and bangs installed and other stuff!!!


thanks guys
Logged
Marty
Hero Member
*****

Karma: +135/-88
Offline Offline

Posts: 1368


« Reply #1 on: October 04, 2019, 04:03:45 AM »

Why do you wanna use a usdm file on a euro car? I mean they have the same maf injectors and turbo so it should be a straight cross flash.
« Last Edit: October 04, 2019, 04:38:01 AM by Marty » Logged

Marty
Hero Member
*****

Karma: +135/-88
Offline Offline

Posts: 1368


« Reply #2 on: October 04, 2019, 04:47:31 AM »

 :Pposted twice oops  Shocked
« Last Edit: October 04, 2019, 04:49:51 AM by Marty » Logged

Marty
Hero Member
*****

Karma: +135/-88
Offline Offline

Posts: 1368


« Reply #3 on: October 04, 2019, 04:48:16 AM »

looked threw the file a bit but couldnt find a tuner tag. file looks half way decent, calibrations in general look decent i went ahead and ported the calibrations for tt225 injectors, numbed boost control for a starting point with a k04-001 im assuming you plan on using? Set fuel consumption display map to  the proper value and upped the allowable airflow before signal too high diagnostics is triggered for the maf.  this file is by no means a finished tune for your setup but it will at least get you running and driving with the setup you wanna run
Logged

jlap1990
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« Reply #4 on: October 04, 2019, 11:28:44 AM »

looked threw the file a bit but couldnt find a tuner tag. file looks half way decent, calibrations in general look decent i went ahead and ported the calibrations for tt225 injectors, numbed boost control for a starting point with a k04-001 im assuming you plan on using? Set fuel consumption display map to  the proper value and upped the allowable airflow before signal too high diagnostics is triggered for the maf.  this file is by no means a finished tune for your setup but it will at least get you running and driving with the setup you wanna run

Thanks for your help Marty

So I can just take the stage 2 tune and install it on any similar 1.8t with the same setup, I calibrate the tune and I'm trying to Learn to make a good tune
Logged
adam-
Hero Member
*****

Karma: +93/-23
Offline Offline

Posts: 1816


« Reply #5 on: October 04, 2019, 12:42:34 PM »

No you cannot just cross-flash random shit.
Logged
jlap1990
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« Reply #6 on: October 08, 2019, 09:51:26 PM »

No you cannot just cross-flash random shit.

yes i know that!! trying to learn and improve!! that is why im asking
Logged
adam-
Hero Member
*****

Karma: +93/-23
Offline Offline

Posts: 1816


« Reply #7 on: October 09, 2019, 05:46:58 AM »

yes i know that!! trying to learn and improve!! that is why im asking

You asked and I told you!!!!!!  Sorry I won't help again!!!!!!!!!


!!!!!!!!!!!!!!!!
Logged
turboat
Hero Member
*****

Karma: +42/-2
Offline Offline

Posts: 617


« Reply #8 on: October 09, 2019, 03:40:19 PM »

No you cannot just cross-flash random shit.

It's one way to find out if stuff is cross flashable  Roll Eyes
Logged
dilly
Full Member
***

Karma: +7/-12
Offline Offline

Posts: 191



« Reply #9 on: October 19, 2019, 07:06:35 PM »

It's one way to find out if stuff is cross flashable  Roll Eyes
i mean this isn't false lmao
Logged
316LV
Full Member
***

Karma: +10/-2
Offline Offline

Posts: 150


« Reply #10 on: October 20, 2019, 02:58:22 PM »

yes i know that!! trying to learn and improve!! that is why im asking

To determine if you can cross flash, you have to determine if the ECUs are similar enough. First look at the bootrom as displayed when using ME7Check. If they are the same then it may work, otherwise it won't. Both the AUQ and AWP use 5.12 bootrom so you are fine there.

Next you have to determine if the ECUs are in the same 'family' (meaning same architecture). Here is a link to a post on that:

http://nefariousmotorsports.com/forum/index.php?topic=267.msg1422#msg1422

As you can see, both the Seat Cupra and VW Golf that use the files you are referring to in your post are both VAG100. That means they will cross flash no problem. The ECUs are the same for all intents and purposes. The further ECUs are in 'family' number, the less likely they will cross flash FYI...
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
BlackT
Sr. Member
****

Karma: +13/-4
Offline Offline

Posts: 446



« Reply #11 on: October 20, 2019, 11:32:29 PM »

Good info i did't know that me7check can see bootrom, thank you very much
BDW. i sucsesufuly flash
VAG135  Audi A4 EURO MY2002 1.8T 8E0909518AH S0002
File on
VAG130   VW Passat NA MY2003 1.8T 4B0906018DH S0002

Logged
jlap1990
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« Reply #12 on: October 20, 2019, 11:51:11 PM »

To determine if you can cross flash, you have to determine if the ECUs are similar enough. First look at the bootrom as displayed when using ME7Check. If they are the same then it may work, otherwise it won't. Both the AUQ and AWP use 5.12 bootrom so you are fine there.

Next you have to determine if the ECUs are in the same 'family' (meaning same architecture). Here is a link to a post on that:

http://nefariousmotorsports.com/forum/index.php?topic=267.msg1422#msg1422

As you can see, both the Seat Cupra and VW Golf that use the files you are referring to in your post are both VAG100. That means they will cross flash no problem. The ECUs are the same for all intents and purposes. The further ECUs are in 'family' number, the less likely they will cross flash FYI...

That is the answer I was looking for, thanks bro

So on my 8n0906018bj European s3 Bam engine vag110 ecu is crossflashable with wich ecu type?
Logged
jlap1990
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« Reply #13 on: October 20, 2019, 11:52:23 PM »

Good info i did't know that me7check can see bootrom, thank you very much
BDW. i sucsesufuly flash
VAG135  Audi A4 EURO MY2002 1.8T 8E0909518AH S0002
File on
VAG130   VW Passat NA MY2003 1.8T 4B0906018DH S0002




Thanks for sharing that, I was able to crossflash awp to auq successfully car is running great, what else people crossflash?
Logged
316LV
Full Member
***

Karma: +10/-2
Offline Offline

Posts: 150


« Reply #14 on: October 21, 2019, 04:36:37 PM »

That is the answer I was looking for, thanks bro

So on my 8n0906018bj European s3 Bam engine vag110 ecu is crossflashable with wich ecu type?

Happy to help. Your 8N0 will cross flash with all the ECUs in that same family:

8N0906018L S0003
8N0906018H S0004
8N0906018AH S0004
8N0906018J S0003
8N0906018AG S0003
8N0906018BH S0001
8N0906018BJ S0001
1ML906032 S0001
06A906032BJ S0002
1ML906032A S0001

As BlackT points out, you may get lucky with ones that are in "families" that are close. That would take experimentation though. Have a bench rig and the ability to bootmode before you try that!
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 18 queries. (Pretty URLs adds 0s, 0q)