Shocerote
Jr. Member
Karma: +1/-2
 Offline
Posts: 42
|
 |
« on: October 03, 2019, 10:30:52 PM »
|
|
|
Hello guys, I want to make this file compatible to use on a AUQ Seat leon 1.8t, the original file is from a stage 2 Awp gti
someone can help me out?
I want to edit injector size to 386cc and k04 turbo compatibility
this tune have pops and bangs installed and other stuff!!!
thanks guys
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #1 on: October 04, 2019, 04:03:45 AM »
|
|
|
Why do you wanna use a usdm file on a euro car? I mean they have the same maf injectors and turbo so it should be a straight cross flash.
|
|
|
|
« Last Edit: October 04, 2019, 04:38:01 AM by Marty »
|
Logged
|
Giving your mom a tuneup
|
|
|
|
_nameless
|
|
« Reply #2 on: October 04, 2019, 04:47:31 AM »
|
|
|
:Pposted twice oops  |
|
|
|
« Last Edit: October 04, 2019, 04:49:51 AM by Marty »
|
Logged
|
Giving your mom a tuneup
|
|
|
|
_nameless
|
|
« Reply #3 on: October 04, 2019, 04:48:16 AM »
|
|
|
looked threw the file a bit but couldnt find a tuner tag. file looks half way decent, calibrations in general look decent i went ahead and ported the calibrations for tt225 injectors, numbed boost control for a starting point with a k04-001 im assuming you plan on using? Set fuel consumption display map to the proper value and upped the allowable airflow before signal too high diagnostics is triggered for the maf. this file is by no means a finished tune for your setup but it will at least get you running and driving with the setup you wanna run
|
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
Shocerote
Jr. Member
Karma: +1/-2
Offline
Posts: 42
|
|
« Reply #4 on: October 04, 2019, 11:28:44 AM »
|
|
|
looked threw the file a bit but couldnt find a tuner tag. file looks half way decent, calibrations in general look decent i went ahead and ported the calibrations for tt225 injectors, numbed boost control for a starting point with a k04-001 im assuming you plan on using? Set fuel consumption display map to the proper value and upped the allowable airflow before signal too high diagnostics is triggered for the maf. this file is by no means a finished tune for your setup but it will at least get you running and driving with the setup you wanna run
Thanks for your help Marty So I can just take the stage 2 tune and install it on any similar 1.8t with the same setup, I calibrate the tune and I'm trying to Learn to make a good tune |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #5 on: October 04, 2019, 12:42:34 PM »
|
|
|
No you cannot just cross-flash random shit.
|
|
|
|
|
Logged
|
|
|
|
Shocerote
Jr. Member
Karma: +1/-2
Offline
Posts: 42
|
|
« Reply #6 on: October 08, 2019, 09:51:26 PM »
|
|
|
No you cannot just cross-flash random shit.
yes i know that!! trying to learn and improve!! that is why im asking |
|
|
|
|
Logged
|
|
|
|
|
adam-
|
|
« Reply #7 on: October 09, 2019, 05:46:58 AM »
|
|
|
yes i know that!! trying to learn and improve!! that is why im asking
You asked and I told you!!!!!! Sorry I won't help again!!!!!!!!! !!!!!!!!!!!!!!!! |
|
|
|
|
Logged
|
|
|
|
|
turboat
|
|
« Reply #8 on: October 09, 2019, 03:40:19 PM »
|
|
|
No you cannot just cross-flash random shit.
It's one way to find out if stuff is cross flashable  |
|
|
|
|
Logged
|
|
|
|
|
dilly
|
|
« Reply #9 on: October 19, 2019, 07:06:35 PM »
|
|
|
It's one way to find out if stuff is cross flashable i mean this isn't false lmao |
|
|
|
|
Logged
|
|
|
|
316LV
Full Member
Karma: +12/-2
Offline
Posts: 150
|
|
« Reply #10 on: October 20, 2019, 02:58:22 PM »
|
|
|
yes i know that!! trying to learn and improve!! that is why im asking
To determine if you can cross flash, you have to determine if the ECUs are similar enough. First look at the bootrom as displayed when using ME7Check. If they are the same then it may work, otherwise it won't. Both the AUQ and AWP use 5.12 bootrom so you are fine there. Next you have to determine if the ECUs are in the same 'family' (meaning same architecture). Here is a link to a post on that: http://nefariousmotorsports.com/forum/index.php?topic=267.msg1422#msg1422As you can see, both the Seat Cupra and VW Golf that use the files you are referring to in your post are both VAG100. That means they will cross flash no problem. The ECUs are the same for all intents and purposes. The further ECUs are in 'family' number, the less likely they will cross flash FYI... |
|
|
|
|
Logged
|
Go ahead and give me negative karma... I don't care if you like what I post princess.
|
|
|
|
BlackT
|
|
« Reply #11 on: October 20, 2019, 11:32:29 PM »
|
|
|
Good info i did't know that me7check can see bootrom, thank you very much
BDW. i sucsesufuly flash
VAG135 Audi A4 EURO MY2002 1.8T 8E0909518AH S0002
File on
VAG130 VW Passat NA MY2003 1.8T 4B0906018DH S0002
|
|
|
|
|
Logged
|
|
|
|
Shocerote
Jr. Member
Karma: +1/-2
Offline
Posts: 42
|
|
« Reply #12 on: October 20, 2019, 11:51:11 PM »
|
|
|
To determine if you can cross flash, you have to determine if the ECUs are similar enough. First look at the bootrom as displayed when using ME7Check. If they are the same then it may work, otherwise it won't. Both the AUQ and AWP use 5.12 bootrom so you are fine there. Next you have to determine if the ECUs are in the same 'family' (meaning same architecture). Here is a link to a post on that: http://nefariousmotorsports.com/forum/index.php?topic=267.msg1422#msg1422As you can see, both the Seat Cupra and VW Golf that use the files you are referring to in your post are both VAG100. That means they will cross flash no problem. The ECUs are the same for all intents and purposes. The further ECUs are in 'family' number, the less likely they will cross flash FYI... That is the answer I was looking for, thanks bro So on my 8n0906018bj European s3 Bam engine vag110 ecu is crossflashable with wich ecu type? |
|
|
|
|
Logged
|
|
|
|
Shocerote
Jr. Member
Karma: +1/-2
Offline
Posts: 42
|
|
« Reply #13 on: October 20, 2019, 11:52:23 PM »
|
|
|
Good info i did't know that me7check can see bootrom, thank you very much
BDW. i sucsesufuly flash
VAG135 Audi A4 EURO MY2002 1.8T 8E0909518AH S0002
File on
VAG130 VW Passat NA MY2003 1.8T 4B0906018DH S0002
Thanks for sharing that, I was able to crossflash awp to auq successfully car is running great, what else people crossflash? |
|
|
|
|
Logged
|
|
|
|
316LV
Full Member
Karma: +12/-2
Offline
Posts: 150
|
|
« Reply #14 on: October 21, 2019, 04:36:37 PM »
|
|
|
That is the answer I was looking for, thanks bro
So on my 8n0906018bj European s3 Bam engine vag110 ecu is crossflashable with wich ecu type?
Happy to help. Your 8N0 will cross flash with all the ECUs in that same family: 8N0906018L S0003 8N0906018H S0004 8N0906018AH S0004 8N0906018J S0003 8N0906018AG S0003 8N0906018BH S0001 8N0906018BJ S0001 1ML906032 S0001 06A906032BJ S0002 1ML906032A S0001 As BlackT points out, you may get lucky with ones that are in "families" that are close. That would take experimentation though. Have a bench rig and the ability to bootmode before you try that! |
|
|
|
|
Logged
|
Go ahead and give me negative karma... I don't care if you like what I post princess.
|
|
|
|
