Limited, get timeout if I go over 32 bites.
Wouldn't want to but could try with cluster unplugged.
Playing with Imx and and got adaptions to zero, still had too much overshoot.
Lowered Imx bit more for this log and it doesn't look as good and gives small corrections..
Going to go back and try Q2 to tame overshoot.
On the last KfldImx axis my input
from 1750-3500 I have 50
4000-6500 is 60.
In the log it shows Boost PidIMax higher, is this showing it with the corrections added?
Ignition drops low even with Actual < specified, from the wiki
If you are seeing timing intervention when PED is >60% you are likely seeing ARMD intervention
The defined file I use has KFDMDADP and KFDMDARO 0, KFDMDARO 1, KFDMDARO 2 , KFDMDARO 3 and
KFDMDAROS.
Which map should I adjust? Just KFDMDARO 0?
Also tempting the idea of Scaling back the Maf.
Thanks for the patience!