EDC15 IMMO

Pages: [1]

« previous next »

Author

Topic: EDC15 IMMO (Read 12772 times)

240sxpooter

Jr. Member

Karma: +5/-1
Offline

Offline

Posts: 32

	EDC15 IMMO « on: March 16, 2012, 08:59:13 AM »

Has anyone preformed a De-Immo on a EDC15VM+?

038906012GN
Diesel EDC15VM+ 4308
0281011034

I'm willing to pay for a working solution.

Cheers


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: EDC15 IMMO « Reply #1 on: March 16, 2012, 10:55:48 AM »

can i just asked how you read this please.


	Logged

BDK

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 28

	Re: EDC15 IMMO « Reply #2 on: March 16, 2012, 04:49:39 PM »

There's a free downloadable utility on the abritus72 (vag commander) website. I haven't personally tried it though.


	Logged

240sxpooter

Jr. Member

Karma: +5/-1
Offline

Offline

Posts: 32

	Re: EDC15 IMMO « Reply #3 on: March 19, 2012, 06:42:39 AM »

Quote from: littco on March 16, 2012, 10:55:48 AM

can i just asked how you read this please.

With a chip reader. Does the file look corrupt?


	Logged

SundayNightDriver

Jr. Member

Karma: +9/-1
Offline

Offline

Posts: 25

	Re: EDC15 IMMO « Reply #4 on: March 29, 2012, 04:16:17 AM »

I have a similar dump with immo on + off. Byte 01b0 and 01de (value 0x73 in your dump) were changed from 0x60 to 0x33 there. The pages have no CRCs. Try changing the two bytes to 33.


	Logged

hans j

Newbie

Karma: +0/-0
Offline

Offline

Posts: 7

	Re: EDC15 IMMO « Reply #5 on: September 17, 2012, 05:57:38 PM »

Quote from: 240sxpooter on March 19, 2012, 06:42:39 AM

With a chip reader. Does the file look corrupt?

Did you desolder this then? There are a few programs out there that will supposedly switch immo on and off and I can load this file and read VIN, IMMO and KM and supposed to be able to switch IMMO on or off.

I have been trying to find a way to get the .bin file off my ecus so I can drive my diesel swap.


	Logged

NMS

Full Member

Karma: +6/-3
Offline

Offline

Posts: 50

	Re: EDC15 IMMO « Reply #6 on: September 17, 2012, 08:44:02 PM »

IMMO OFF solution:

Address 1B0 from 73 -> 60
Address 1DE from 73 -> 60

Attached IMMO off file.

Edit: Shit, just noticed this is an ancient thread. Sorry for bumping, saw hans post, thought it was a fresh thread.


	Logged

hans j

Newbie

Karma: +0/-0
Offline

Offline

Posts: 7

	Re: EDC15 IMMO « Reply #7 on: September 18, 2012, 12:17:16 PM »

Thanks for the file, I'm still fighting how to get the .bin off the ecu. My ebay galletto cable is on it's way though!

I have 012FD, 012FF and 012CP (IMMO2) ecu's to play with, just need more time to mess with the settings on nefmoto to see if it will work.


	Logged

NMS

Full Member

Karma: +6/-3
Offline

Offline

Posts: 50

	Re: EDC15 IMMO « Reply #8 on: September 18, 2012, 07:03:57 PM »

Quote from: hans j on September 18, 2012, 12:17:16 PM

It won't. These tools are for reading FLASH only. You want to buy a tool called "UPA-USB" by Elrasoft. That will read/write eeproms. Or a GQ-3X which will do both, but you will need to adapters, as well as soldering stations + hot air station.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 12:42:04 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search