Pages: [1]
Author Topic: MED9.1.2 English Translated FR Parts  (Read 3719 times)
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83


« on: October 24, 2019, 08:06:10 AM »

Hello everyone,
I started to translate the TTRS/ RS3 MED9.1.2 FR from german to english...
Some of it may not be the correct translation, but I am trying...

I am just getting started, and wanted to ask what modules would you like translated?

Here is what I have so far...
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83


« Reply #1 on: October 24, 2019, 08:15:10 AM »

A few more...
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: October 24, 2019, 10:24:51 AM »

Nice  job! Might come in handy for someone.
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83


« Reply #3 on: October 24, 2019, 10:29:00 AM »

Thanks,
I'm going to take a look at the common me7 ones and translate those and any other ones people want.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #4 on: October 24, 2019, 10:38:02 AM »

Thanks,
I'm going to take a look at the common me7 ones and translate those and any other ones people want.

ME7 is pretty well translated plus there is an english Me7.3 too, however you can still try to translate some of the "lesser" modules of ME7.5.
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83


« Reply #5 on: October 24, 2019, 12:04:31 PM »

What I mean is that rather than translate the entire med9 FR, I will see what the most common ME7 modules are, and translate those module as well for the MED9.

The majority of it is probably the same from the MED9 to the ME7, but i'm sure that there are some differences in the same modules.
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 395



« Reply #6 on: October 24, 2019, 03:00:26 PM »

Tuning is probably the same on all really; ignition, injection, LDR control, inlet mani/air mass, DK control, VVT control, anti-judder, torque manipulation/traction, ATM control, knock control etc - all the basics to varying degrees....just update when you can!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 16 queries. (Pretty URLs adds 0s, 0q)