Pages: [1]
Author Topic: ASM fun = bricked ecu  (Read 3362 times)
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 126


« on: October 31, 2019, 03:34:15 PM »

Hi guys,

Today I tried to "patch" my 032DK ecu with my self-made asm code. The main reason was to learn something new. After I flashed my ecu with patch binary engine started normally but after couple of seconds ecu bricked itself. I tried disconnecting baterry but it didnt help. I'll try to flash it in boot mode but now its like -10 degree celcius and 3am so I'll do it in two days. But one thing don't let me sleep now. Is that possible to brick ECU forever with wrong asm patches, I mean something like damaging physically anything in circuit.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: October 31, 2019, 03:39:55 PM »

Is that possible to brick ECU forever with wrong asm patches, I mean something like damaging physically anything in circuit.

Extremely unlikely, but possible.

The #1 thing you can blow out is the ignition drivers.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1456


mk4 1.8T AUM


« Reply #2 on: October 31, 2019, 09:33:41 PM »

or just blown the fuse
Logged
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 126


« Reply #3 on: November 01, 2019, 11:00:49 AM »

Flashed original bin back and ecu is alive, surprisingly I didnt even had to do it in bootmode because ecu partially booted after being powered off for a night and was able to get into bootmode by obd.
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #4 on: November 01, 2019, 12:45:55 PM »

What you try to change, and where you put your code in BIN? If that is not secret?
Logged
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 126


« Reply #5 on: November 03, 2019, 12:34:05 PM »

nothing really special, it was just for practice (press brake and gas pedal to flash MIL)
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)