Pages: [1]
Author Topic: Lambda wrong when BTS is active  (Read 3736 times)
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« on: November 02, 2019, 10:37:32 AM »

Hi,

I've just found a strange thing with my lambda values. After BTS is activated my current lambda goes down to 0,75, the desired is 0,77. What could be the problem? Fuel pump or lambda sensor?

Thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: November 02, 2019, 10:46:43 AM »

log trims.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #2 on: November 02, 2019, 11:04:46 AM »

log trims.

What are the variables? I know only in VCDS stft and ltft
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037


« Reply #3 on: November 03, 2019, 07:58:27 AM »

a) LALIUSMN
b) No closed loop control with BTS on.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #4 on: November 03, 2019, 02:24:06 PM »

a) LALIUSMN
b) No closed loop control with BTS on.

Thanks a lot. I haven't known that it has a measuring limit.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)