Pages: [1]
Author Topic: Burning out 2.0t Coil packs left and right  (Read 3187 times)
ZakDodge
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 42


« on: November 07, 2019, 04:52:34 PM »

So I'm not sure what is going on. My little brother's 1.8t is burning out coil packs like crazy to the point he had replaced the coil harness thinking that was the issue, however I think its something else.

its an atw that has been converted over to the 018ch.
2.0t coil packs running NGK BKR6E plugs.

Any Dwell time maps have been left stock.

What should I log to figure out what if any changes should be made to dwell?
Logged
fluke9
Full Member
***

Karma: +26/-1
Offline Offline

Posts: 113


« Reply #1 on: November 08, 2019, 01:29:27 AM »

2.0t coil packs running NGK BKR6E plugs.

Are the sparkplugs 100% ok ?
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041


« Reply #2 on: November 08, 2019, 02:43:02 AM »

Log dwelltime, but you probably need to change it.

2.0-2.5ms at 14V is your target for lower power car.

If you have LC/NLS patch, then FTOMN at 0 will also fry coil packs on many ECU's.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)