Pages: 1 [2]
Author Topic: Stock injectors and 5 bar fpr KRKTE  (Read 8177 times)
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #15 on: November 15, 2019, 03:58:36 AM »

Before even talking about what the pump can flow, I'm sure no one here has actually checked an FPR with a compressor and a pressure gauge and actually seen that they ALL max out at 5.4 bar and that they can't increase fuel pressure above that. even if you feed it 3 bar of boost, it will still only give you 5.4 or 5.7 bar max.
Logged

I have no logs because I have a boost gauge (makes things easier)
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #16 on: November 15, 2019, 05:48:37 AM »

I have been thinking about this and and came to the conclusion the larger injector are required sooner or later. Now i am waiting on 550cc EV14 and i will post back after install, will initially install with 3 bar fpr and if required will increase to 4 bar
Logged
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #17 on: December 04, 2019, 03:24:59 AM »

Just to finish this up, purchase 550cc Ev14's and installed and never had an issue since, i strongly recommend to this method instead of increasing fuel pressure.

Definitely a worthwhile upgrade
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)