Can't commit changes in TunerPro

Pages: [1]

« previous next »

Author

Topic: Can't commit changes in TunerPro (Read 6271 times)

e_pacman

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 38

	Can't commit changes in TunerPro « on: March 21, 2012, 12:29:45 AM »

I have a small problem with TunerPro. When I do a change in a map and click Commit changes, it doesn't seem to stick. The map window closes but the next time I open it, my change has been forgotten. I looked for help on the TunerPro site but could not find anything there. Am I missing something?


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: Can't commit changes in TunerPro « Reply #1 on: March 21, 2012, 01:22:57 AM »

In the rows and columns make sure the address step is set to 2 for 16bit maps and 1 for 8bit. You've probably got -4 in there at the moment


	Logged

e_pacman

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 38

	Re: Can't commit changes in TunerPro « Reply #2 on: March 21, 2012, 01:50:16 AM »

Thanks, but that wasn't it. Map data is presented correctly in TunerPro, I just can't save any changes. For now, I have to do the actual changes in a hex editor, then open and save the file in TunerPro to get the checksum right.


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: Can't commit changes in TunerPro « Reply #3 on: March 21, 2012, 03:56:29 AM »

In tuner pro what values do you presently have for address step?


	Logged

e_pacman

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 38

	Re: Can't commit changes in TunerPro « Reply #4 on: March 21, 2012, 04:55:07 AM »

Adress step is 2, and it's a 16 bit map. (LDRXN)


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: Can't commit changes in TunerPro « Reply #5 on: March 21, 2012, 05:07:49 AM »

Cool. So can I just check then you are clicking the red x in the map window to commit changes to the map and then doing "file" "save" to save the .bin file?

It should then if you have the Mtx plugin installed say checksum
Checked.


	Logged

e_pacman

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 38

	Re: Can't commit changes in TunerPro « Reply #6 on: March 21, 2012, 06:23:04 AM »

Quote from: littco on March 21, 2012, 05:07:49 AM

Well, that is what happens, except that when I click to save the bin file I get the message: "No checksums corrected! Are you shure you modified this file?"


	Logged

sn00k

Sr. Member

Karma: +59/-2
Offline

Offline

Posts: 277

	Re: Can't commit changes in TunerPro « Reply #7 on: March 21, 2012, 08:32:04 AM »

are you by chance using a "high limit" and "low limit" in the xdf entry of that LDRXN?

i did this earlier, with my high limit set to 160 for everything to look nice.. all changes i did in tunerpro above 160 was IGNORED.. very annoying untill i figured out why, and as you pointed out, hex editing them worked just fine Grin

also, go into the XDF header settings and alter the field called "Bin size" to: 1000000
im 100% sure this will solve your problem.


	Logged

e_pacman

Jr. Member

Karma: +1/-0
Offline

Offline

Posts: 38

	Re: Can't commit changes in TunerPro « Reply #8 on: March 22, 2012, 10:52:50 AM »

Quote from: sn00k on March 21, 2012, 08:32:04 AM

also, go into the XDF header settings and alter the field called "Bin size" to: 1000000
im 100% sure this will solve your problem.

Excellent, that was it! Thanks guys.


	Logged

sn00k

Sr. Member

Karma: +59/-2
Offline

Offline

Posts: 277

	Re: Can't commit changes in TunerPro « Reply #9 on: March 22, 2012, 03:10:44 PM »


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

September 26, 2024, 09:26:04 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search