Do you know that CPU content оf A3 3.2 ECUs is absolute different from CPU content used in 2.8 engine 032BG?
Cpu code is incompatible beetween ECUs and can't be changed.

Yeah, they're for 2 different projects. Thanks for those, will come in handy, it's a full read of A3 DSG 2002-2004 ish UK/Euro spec too I was after for a future purchase as I only have manual ones at the moment.

After an 03+ A3 3.2 in the same respect if you have one, next FI project; 03-05(ish) A3 DSG

I have one from BUB 3.2 engine with manual gearbox it's ME7.1.1 032CA

Post up a KP if you wanna be helpful.

Yeah, put your DSG read up, would like to compare it to my mk5 R32 ones, or PM me if you want.

I don't post up kp's as I don't use Winols anymore for anything except looking at my old def files I built, I'll build Tunerpro files on people's oem ones for a fee inc. checksum updates, turbo etc.

However, if you do use ols it should literally take you 5-10mins to dig out the main maps you need - on this st10 TT file, TT's have a mish mash of ME.7.1.1. maps - i.e. I think this looked like it was using the newer MSFMU map or whatever it's called whereas other TT's and mk5 R32 ST10 will use MLHFM! Lot's/most should be the same as it though.

So - Winols - this ST10 type TT - mk5 R32 DAMOS
032BG - mk4 R32 DAMOS

Both DAMOS files are in the "definition file" area - look through the pages in there to find them.

Nice one!