Pages: [1]
Author Topic: Cold Start Enrichment  (Read 4287 times)
alperx
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 25

Always be your own dog.


WWW
« on: March 22, 2012, 07:40:36 AM »

hello
the engine is AJL and this is a ME3.8.2.
Injectors changed from stock to Bosch 490cc.
The car runs fine, however, when I start the car, the engine is "lean" until it gets hot.

What should I check ?
Logged

nokiafix
Full Member
***

Karma: +19/-2
Offline Offline

Posts: 124


« Reply #1 on: March 22, 2012, 02:22:51 PM »

hello
the engine is AJL and this is a ME3.8.2.
Injectors changed from stock to Bosch 490cc.
The car runs fine, however, when I start the car, the engine is "lean" until it gets hot.

What should I check ?

What maf are you using and which maps have use used to calibrate fuel?

Nick
Logged
alperx
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 25

Always be your own dog.


WWW
« Reply #2 on: March 26, 2012, 01:04:06 AM »

MAF is stock.

to calibrate fuel, I used

partial load map ($92b4)
general fuel trim (grundanpassungsfaktor 0 - $7507)
spannungskorrektur (battery voltage correction - $9563)
minimales TE ($7502)
startungmenge ($74e8-$74f6)
Logged

@lq!
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 62


« Reply #3 on: June 16, 2012, 02:37:52 AM »

any news ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0s, 0q)