NefMoto > Technical > Flashing and Chipping > GQ-4X programmer problem!
Pages: [1]
« previous next »
Author Topic: GQ-4X programmer problem!  (Read 6408 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« on: November 25, 2019, 04:17:04 PM »
Hi!!

My GQ-4x always works perfectly, but now have a problem thats cause fails on initialization!

The MCumall suport say that this programmer was discontinued for several years, and the service is no longer available for this model!

I will have to buy another programmer, and i need just to reand and write the 28F102 memory, the way is buy the GQ4x4 beause i dont know others programmer that read and write this memory!

Anybody know the better way to solve it?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #1 on: November 25, 2019, 05:09:01 PM »
i have a used gq4x4 that i no longer use or need.

also, i bought a batronix to solve all the issues associated with the gq and mcumall products.
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #2 on: November 25, 2019, 06:30:27 PM »
Quote from: k0mpresd on November 25, 2019, 05:09:01 PM
i have a used gq4x4 that i no longer use or need.


also, i bought a batronix to solve all the issues associated with the gq and mcumall products.


Thanks for information!

Batronix is a German company?

Batronix BX40 Bagero II suports 28F102! €249,00

The Gq4x4 its low cost, but is better to pay more to solve all problems

I dont found a model with a low price than €249,00 that suports 28F102
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: November 25, 2019, 07:50:26 PM »
i have the bx40 along with their plcc44, psop44, and soic8 adapters. it works 100% and is 10* faster than the gq programmers.

you can also find some adapters for much cheaper price from china if you search hard enough.

the batronix also interfaces with ols, so do not even need to export the file. just select program inside ols and magic happens.
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #4 on: November 26, 2019, 09:43:43 AM »
Quote from: k0mpresd on November 25, 2019, 07:50:26 PM
i have the bx40 along with their plcc44, psop44, and soic8 adapters. it works 100% and is 10* faster than the gq programmers.

you can also find some adapters for much cheaper price from china if you search hard enough.

the batronix also interfaces with ols, so do not even need to export the file. just select program inside ols and magic happens.

Nice!!

I always had problems with GQ-4x, to erase the memory I had to repeat the process for 15x.

In M3.8.2, have a way to read and write with the MPPS like a M7.*?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #5 on: November 26, 2019, 09:50:21 AM »
Quote from: Gulfstream on November 26, 2019, 09:43:43 AM
Nice!!

I always had problems with GQ-4x, to erase the memory I had to repeat the process for 15x.

batronix does not have this issue. mcumall really is junk if you are using it for any type of commercial use.
for hobby, sure, its ok. work around the issues but when reliability and efficiency matter, there are much better options available.
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #6 on: December 14, 2019, 03:20:13 PM »
Quote from: k0mpresd on November 26, 2019, 09:50:21 AM
batronix does not have this issue. mcumall really is junk if you are using it for any type of commercial use.
for hobby, sure, its ok. work around the issues but when reliability and efficiency matter, there are much better options available.

Thanks for helping!!!
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #7 on: December 14, 2019, 04:21:58 PM »
Quote from: Gulfstream on December 14, 2019, 03:20:13 PM
Thanks for helping!!!

did you purchase the bx40?
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #8 on: February 25, 2020, 03:38:34 PM »
Quote from: k0mpresd on December 14, 2019, 04:21:58 PM
did you purchase the bx40?

Not yeat!

I used a GQ4x4, i will buy the BX40 problably in next month!

Sorry for delay!
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #9 on: October 01, 2020, 04:28:40 PM »
Quote from: k0mpresd on December 14, 2019, 04:21:58 PM
did you purchase the bx40?

I bought a BX40!!
So much better than gg4x4!!!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 09:29:15 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)