MED17 overboosting at 24psi, how to use the overboost function

Pages: [1]

« previous next »

Author

Topic: MED17 overboosting at 24psi, how to use the overboost function (Read 7769 times)

kolbenmann

Newbie

Karma: +0/-0
Offline

Offline

Posts: 10

	MED17 overboosting at 24psi, how to use the overboost function « on: March 25, 2012, 10:08:41 PM »

I need some experts help to cure some issues with this tune on an A4 B8 2010 S-Tronic

1. The tune is running 24psi, I couldn't stabilize the boost creep, 20psi and holding would be awesome, I need to find the overboost map to keep it safe.
2. I need to increase RPM limit for launch control to 5000RPMs at the moment it has 4000RPM and car bogs down too much
3. The throttle response is very slow, this is a general complain on all stock cars with DSG transmisions, is there any other map than drivers wish to get a better response from a stop?, In dynamic mode it works better but still there is a very noticeable lag.

Attached are the stock and tuned (tf.v7.ac) files.

Hope someone could give me a hand on it


« Last Edit: March 25, 2012, 10:15:08 PM by kolbenmann »	Logged

RaraK

Hero Member

Karma: +58/-2
Offline

Offline

Posts: 539

	Re: MED17 overboosting at 24psi, how to use the overboost function « Reply #1 on: March 26, 2012, 05:54:11 AM »

RPM for launch control is in the S-Tronic gearbox ECU

i can look at file this afternoon ill write back later


	Logged

kolbenmann

Newbie

Karma: +0/-0
Offline

Offline

Posts: 10

	Re: MED17 overboosting at 24psi, how to use the overboost function « Reply #2 on: March 26, 2012, 02:18:56 PM »

Anyone has any solution for this MED17?


	Logged

Rick

Hero Member

Karma: +63/-4
Offline

Offline

Posts: 704

	Re: MED17 overboosting at 24psi, how to use the overboost function « Reply #3 on: March 27, 2012, 02:31:10 PM »

I haven't had a chance to identify the maps, how much load are you requesting?


	Logged

RaraK

Hero Member

Karma: +58/-2
Offline

Offline

Posts: 539

	Re: MED17 overboosting at 24psi, how to use the overboost function « Reply #4 on: March 28, 2012, 10:33:24 AM »

yea map identification may help, not super familiar with med17 but i can take a look at your values and get an idea quick


	Logged

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 655

	Re: MED17 overboosting at 24psi, how to use the overboost function « Reply #5 on: March 28, 2012, 11:49:23 PM »

Quote from: RaraK on March 28, 2012, 10:33:24 AM

yea map identification may help, not super familiar with med17 but i can take a look at your values and get an idea quick

See limiter peak values
ldrxn - 210...215%
kfldhbn - 2.80...2.95
kftarx partially over 1.0


	Logged

Gonzo

Sr. Member

Karma: +21/-30
Offline

Offline

Posts: 483

	Re: MED17 overboosting at 24psi, how to use the overboost function « Reply #6 on: April 08, 2012, 06:17:35 PM »

Logs? You are probably requesting too much boost (LDRXN).


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 09:14:07 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search