Pages: 1 ... 16 17 [18] 19
Author Topic: ECUxPlot v1.0.0 released - please read the FAQ in this thread!  (Read 235211 times)
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #255 on: July 05, 2020, 09:48:39 AM »

Ill download and try it out for ya. Will report back when I get the intake manifold back on the car tomorrow.

Family time weekend
Logged
mcskittle
Jr. Member
**

Karma: +1/-3
Offline Offline

Posts: 34


« Reply #256 on: July 05, 2020, 10:04:36 AM »

Will let you know shortly. Thanks

Sent from my SM-N975U using Tapatalk

Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #257 on: July 05, 2020, 10:25:28 AM »

Hi,

i cant figure out why one log is working, the other dont.

regards


Trying to figure this out now.

Finally have a working build system again, thanks for nothing, Oracle!

eta found the issue, will be fixed in the next release.
« Last Edit: July 05, 2020, 01:02:35 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #258 on: July 08, 2020, 02:18:10 AM »

new build released, includes java runtime so no need to download java any more, cobb ap support

Need testers

http://nyet.org/cars/files/ECUxPlot-v1.0.0-setup.exe
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #259 on: July 28, 2020, 04:57:31 AM »

new build released, includes java runtime so no need to download java any more, cobb ap support

Need testers

http://nyet.org/cars/files/ECUxPlot-v1.0.0-setup.exe
I am using it without any issuse so far, thank you very much for this update
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #260 on: July 31, 2020, 09:53:09 AM »

Hi Nyet,

finally german language vcds logs do work.

i do have a new request. attached log contains rpm two times and it is not available in ecuxplot because it is renamed to rpm and rpm raw.
the 2nd file attached is a test where i renamed the rpm columns and they are availible to select in ecuxplot.

thank you for your great work

regards
« Last Edit: July 31, 2020, 09:56:22 AM by aef » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #261 on: July 31, 2020, 03:22:09 PM »

That is intentional so the RPM based calculators (and most importantly, the filter) knows what to look for.
« Last Edit: July 31, 2020, 03:24:15 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Milka
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 129


« Reply #262 on: July 31, 2020, 04:28:01 PM »

Wow, this is great work, can’t wait to get the 6 back on the road to start using it


Sent from my iPhone using Tapatalk
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #263 on: August 01, 2020, 12:27:53 AM »

That is intentional so the RPM based calculators (and most importantly, the filter) knows what to look for.

yes, understand

but in my logfile you will find two different rpm values at the same time/mark
one is used together with the speed and its important to select the correct one

Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #264 on: August 01, 2020, 09:16:51 AM »

yes, understand

but in my logfile you will find two different rpm values at the same time/mark
one is used together with the speed and its important to select the correct one



I'm not quite sure how to handle that.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #265 on: August 01, 2020, 05:12:24 PM »

Working on a solution, should have a test version for you shortly
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #266 on: August 02, 2020, 11:06:44 AM »

yes, understand

but in my logfile you will find two different rpm values at the same time/mark
one is used together with the speed and its important to select the correct one



Please test, TIA!

https://nyet.org/cars/ECUxPlot/nightly/ECUxPlot-v1.0.0-2-gdaef-setup.exe
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #267 on: August 03, 2020, 10:10:18 AM »

Hi Nyet, thank you for creating that extra version

as you can see on the attachment:
The mouseover on the 2nd var is not working. (red circle)
I renamed the 2nd rpm to Motordrehzahl2. The Motordrehzahl1 is interpreted as your RPM, I get that.
Unfortunatelly the 2nd rpm is not used for the correct drawing and thatswhy the drawing is a bit off.

@20.03 its 6320rpm --> correct
and
its 231kmh --> incorrect because this speed is already reached at 19.90

I think the code was never meant to interpret different time(s) in one line.

In me7logger files you will find one time and alot of other .values from that some time.
In vcds you will have different times in one column.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #268 on: August 03, 2020, 11:53:46 AM »

Hi Nyet, thank you for creating that extra version

as you can see on the attachment:
The mouseover on the 2nd var is not working. (red circle)
I renamed the 2nd rpm to Motordrehzahl2. The Motordrehzahl1 is interpreted as your RPM, I get that.
Unfortunatelly the 2nd rpm is not used for the correct drawing and thatswhy the drawing is a bit off.

@20.03 its 6320rpm --> correct
and
its 231kmh --> incorrect because this speed is already reached at 19.90

I think the code was never meant to interpret different time(s) in one line.

In me7logger files you will find one time and alot of other .values from that some time.
In vcds you will have different times in one column.


Yes, there is no way to fix this; there is only one real time ref per file. The most I can do is allow you to specify different times as x axis, but ECUxPlot doesn't know it's not a time axis.

VCDS is really bad in this regard, its not real time series data like all other logs.

Extending it to allow multiple times in the same log would be a lot of work.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
flamy
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 56


« Reply #269 on: November 19, 2020, 03:18:53 AM »

Hello,

I just installed the latest release at a freshly setup system with Windows 7 32bit and JRE8u271.
I'm getting an error message at startup stating:

"An error occurred while starting the application.
The Version of %1 is not compatible with the executing version of Windows.
Open the system information of the computer to check if a x86-(32Bit)- or a x64(64Bit)-version of the program is necessary and contact the supplier of the software"

Is that problem known? Is there any chance to fix it?
Logged
Pages: 1 ... 16 17 [18] 19
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.044 seconds with 17 queries. (Pretty URLs adds 0s, 0q)