Pages: [1]
Author Topic: ME 3.8 Programmer  (Read 3379 times)
kacperoooni
Full Member
***

Karma: +8/-2
Offline Offline

Posts: 121


« on: January 02, 2020, 03:12:45 PM »

Hi,
What programmers do you use for programming me 3.8.2 flash(eeprom?) memory. I mean the one which contains maps. I know there is 27c1024 inside, what other erasable equivalent can be used instead?
Logged
aleks19411
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 60


« Reply #1 on: February 06, 2020, 01:33:57 PM »

Hi,
What programmers do you use for programming me 3.8.2 flash(eeprom?) memory. I mean the one which contains maps. I know there is 27c1024 inside, what other erasable equivalent can be used instead?
yes there is one) in secret to say this is M28F102 in the PLCC44 package
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #2 on: February 06, 2020, 03:54:29 PM »

yes there is one) in secret to say this is M28F102 in the PLCC44 package
whats so secret about it? ive posted that info a few times on this forum
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #3 on: February 14, 2020, 12:23:48 AM »

I was able to do this by bridging to pins on my mpps cable
Logged
prj
Hero Member
*****

Karma: +905/-420
Offline Offline

Posts: 5790


« Reply #4 on: February 14, 2020, 01:18:04 AM »

I was able to do this by bridging to pins on my mpps cable
Not on a 3.8.2
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)