Pages: [1]
Author Topic: ME 3.8 Programmer  (Read 5948 times)
kacperoooni
Full Member
***

Karma: +10/-8
Offline Offline

Posts: 128


« on: January 02, 2020, 03:12:45 PM »

Hi,
What programmers do you use for programming me 3.8.2 flash(eeprom?) memory. I mean the one which contains maps. I know there is 27c1024 inside, what other erasable equivalent can be used instead?
Logged
aleks19411
Full Member
***

Karma: +4/-9
Offline Offline

Posts: 62


« Reply #1 on: February 06, 2020, 01:33:57 PM »

Hi,
What programmers do you use for programming me 3.8.2 flash(eeprom?) memory. I mean the one which contains maps. I know there is 27c1024 inside, what other erasable equivalent can be used instead?
yes there is one) in secret to say this is M28F102 in the PLCC44 package
Logged
_nameless
Hero Member
*****

Karma: +374/-3456
Offline Offline

Posts: 3027



« Reply #2 on: February 06, 2020, 03:54:29 PM »

yes there is one) in secret to say this is M28F102 in the PLCC44 package
whats so secret about it? ive posted that info a few times on this forum
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
https://github.com/ugtuner05-sys
airtite
Hero Member
*****

Karma: +13/-13
Offline Offline

Posts: 743


« Reply #3 on: February 14, 2020, 12:23:48 AM »

I was able to do this by bridging to pins on my mpps cable
Logged
prj
Hero Member
*****

Karma: +1111/-540
Offline Offline

Posts: 6196


« Reply #4 on: February 14, 2020, 01:18:04 AM »

I was able to do this by bridging to pins on my mpps cable
Not on a 3.8.2
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 1.145 seconds with 16 queries. (Pretty URLs adds 0.0010000000000001s, 0q)