Hello ,  do you have algorithm for BMW modules?

i sent PM

Hi, I've been working on the Volvo D13. I already know that it uses the RSA algorithm.
Also, I have the secret key for level 7 and above and I was able to unlock the ECU on those levels.
But in order to reprogram the ECU I need the level 1 access, is there any chance you have the key for security access level 1?
MSW is 23036507
Part number is 21900553
The data I've got from spying the CAN (I'm sure the security level for this data is 1):
Seed (length=116):
0xdd, 0xc7, 0xe7, 0x2f, 0xe6, 0x0c, 0xff, 0x64, 0xf2, 0xb8, 0xb0, 0x15, 0x5a, 0xa3,
0xa7, 0x12, 0x0e, 0xf5, 0x17, 0xeb, 0x79, 0x26, 0x80, 0xf0, 0x5b, 0xfe, 0xac, 0x31,
0x1f, 0x95, 0xbc, 0x7e, 0x00, 0x53, 0xd6, 0x67, 0xa8, 0xf0, 0xb5, 0x3c, 0xcf, 0x74,
0x3c, 0x0d, 0x7d, 0x37, 0xd2, 0xaa, 0xb9, 0xe1, 0x1e, 0xa3, 0x61, 0x6a, 0x68, 0x48,
0xfd, 0x1a, 0xbb, 0xa9, 0x87, 0x89, 0x95, 0x96, 0x13, 0x9f, 0xac, 0x9f, 0x5e, 0x94,
0x26, 0x14, 0x64, 0xf0, 0x47, 0x05, 0x22, 0x8b, 0x71, 0x42, 0xb5, 0x8d, 0xfc, 0x5b,
0x2c, 0x6e, 0x3a, 0xa0, 0x56, 0xf6, 0xba, 0x21, 0x02, 0x3d, 0x91, 0xae, 0x17, 0xab,
0x49, 0xd7, 0x26, 0xf8, 0xb1, 0xec, 0xf3, 0x2c, 0xb0, 0xfd, 0xaa, 0x9f, 0xe2, 0xda,
0x81, 0xf9, 0x91, 0x13

Signed key using the RSA algorithm (length=128):
0x98, 0xe0, 0xa1, 0xf8, 0x1f, 0x5d, 0xd0, 0x81, 0xd3, 0x87, 0x8f, 0x5e, 0xb7, 0x89,
0x79, 0xc9, 0x45, 0x8c, 0xe4, 0x6f, 0x38, 0x9a, 0xe4, 0xe1, 0x8c, 0x2a, 0xc9, 0xf4,
0x00, 0xa3, 0xe3, 0x74, 0x9d, 0xdd, 0x51, 0xd6, 0x9d, 0xff, 0x5d, 0x2e, 0x66, 0x9f,
0xc5, 0x8f, 0x32, 0xb3, 0x23, 0x07, 0xae, 0x7f, 0x9d, 0x45, 0x00, 0x1e, 0x01, 0xd7,
0x3f, 0x2c, 0xe7, 0x7a, 0xf2, 0x97, 0x1c, 0xae, 0x38, 0x0d, 0x44, 0x0f, 0xe2, 0x51,
0x3d, 0x51, 0x2a, 0x46, 0x7b, 0xfe, 0x3f, 0x40, 0x2e, 0x31, 0xde, 0xfb, 0x0a, 0x7d,
0x8e, 0xe9, 0x0f, 0xe0, 0x4e, 0x4d, 0xeb, 0xa5, 0x42, 0xf5, 0x31, 0x9b, 0xcb, 0x6b,
0x31, 0xcc, 0x94, 0x0e, 0x99, 0xc2, 0xdc, 0x12, 0x1a, 0xb8, 0x24, 0x03, 0x50, 0x8d,
0x11, 0xfc, 0x59, 0xc3, 0x9a, 0xcd, 0x49, 0xf8, 0x51, 0xca, 0x5b, 0x73, 0x99, 0x35,
0xec, 0xc1

Hi. Yes, I know this algorithm.

Thank you for answering guys, as I said I've found the algorithm via reverse engineering and I've already unlocked the ECU in level 7 and 11 on the extended session, which means the algorithm is correct and working fine. But, in order to be able to reprogram ECU, I need level 1 access in the programming session.
The reason I've mentioned RSA is because of the code I have, it's using a built-in dotnet class called "RSACryptoServiceProvider". These hexadecimal values are prerequisites to test the secret key and the algorithm. The input of the algorithm is a RsaKey which contains exponent and modulus (both have a length of 128 bytes) and the seed, so every time we give the same seed and the correct key we will get the same output. So these hexadecimal values can confirm the input and the output of the algorithm, the missing part of the puzzle here is the secret key for level 1 security access. by the way, the protocol we are using is ISO15765 (UDS). I'm only interested in level 1 security access exponent and modulus for the MSW I've mentioned here.
It will be a great help to me if anyone is willing to share that key.

Hi We are in the same team, and we are stuck with this problem. Any help from your side will be much appreciated. Also we can pay for the services and helps if you have experience in the field. Looking forward for your recommendations.

Hi!
Which ecu? Which years? Without details it would be difficult to find out.