NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Blown chip. Why?
Pages: [1]
« previous next »
Author Topic: Blown chip. Why?  (Read 3443 times)
JakeGT
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 21
« on: January 04, 2020, 12:46:19 PM »
Hi,

I had an old ECU so have been learning how to flash etc. I tried it in the car but managed to blow a chip.

I used MPPS to write original map (matching hardware & software numbers)
Immo off using Universal Decoding 3.2

I'm not sure what the chip is?

We live and learn.  Grin
Logged
_nameless
Hero Member
*****

Karma: +320/-448
Offline Offline

Posts: 2671
« Reply #1 on: January 04, 2020, 02:40:51 PM »
too much sauce
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #2 on: January 05, 2020, 05:07:30 AM »
Quote from: JakeGT on January 04, 2020, 12:46:19 PM
Hi,

I had an old ECU so have been learning how to flash etc. I tried it in the car but managed to blow a chip.

I used MPPS to write original map (matching hardware & software numbers)
Immo off using Universal Decoding 3.2

I'm not sure what the chip is?

We live and learn.  Grin

Ye fucked it
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1419
« Reply #3 on: January 05, 2020, 05:45:06 AM »
How you manage to do this?
Logged
JakeGT
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 21
« Reply #4 on: January 05, 2020, 07:39:00 AM »
Quote from: BlackT on January 05, 2020, 05:45:06 AM
How you manage to do this?

Honestly I have no idea. I thought even with writing the wrong map etc it wouldn't be possible?

The only thing I can think of is a bit of solder or wire was lose in the ECU  Huh
Logged
SQT
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 57


Respectfully SQT ;)
« Reply #5 on: January 19, 2020, 11:34:22 PM »
Quote from: JakeGT on January 04, 2020, 12:46:19 PM
Hi,

I had an old ECU so have been learning how to flash etc. I tried it in the car but managed to blow a chip.

I used MPPS to write original map (matching hardware & software numbers)
Immo off using Universal Decoding 3.2

I'm not sure what the chip is?

We live and learn.  Grin
write block number or chip marking
Logged
a6 2.7
sorry for my English
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177
« Reply #6 on: January 20, 2020, 12:59:15 AM »
Rear O2 is shorted.
Logged
gremlin
Hero Member
*****

Karma: +180/-7
Offline Offline

Posts: 571
« Reply #7 on: January 20, 2020, 01:26:22 AM »
It's a CJ110 - control and amplifier circuit for the wide range lambda sensor.
Outside ECU connected to lambda before catalyst.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177
« Reply #8 on: January 20, 2020, 02:10:51 AM »
*I meant front, soz.
Logged
SQT
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 57


Respectfully SQT ;)
« Reply #9 on: April 06, 2020, 02:26:51 PM »
Quote from: gremlin on January 20, 2020, 01:26:22 AM
It's a CJ110 - control and amplifier circuit for the wide range lambda sensor.
Outside ECU connected to lambda before catalyst.
yes it is, the binding is similar to me 7.1.1, but I don’t know how the author will correct this block
Logged
a6 2.7
sorry for my English
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 16, 2024, 03:39:52 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 17 queries. (Pretty URLs adds 0s, 0q)