Pages: [1]
Author Topic: Batronix Bagero II  (Read 4717 times)
kacperoooni
Full Member
***

Karma: +10/-8
Offline Offline

Posts: 128


« on: January 08, 2020, 02:24:50 PM »

Hi guys,
I strongly consider buying Bagero II for 28F102 programming (m3.8.2). I found offer for 249 euro but it's without DIP40 to PLCC44 adapter which I need. I've have found it on their website but it is quite expensive for adapter. Is this adapter the only one which will work? Or any simple china dip40 to plcc44 adapter will work? Thanks in advance
Logged
_nameless
Hero Member
*****

Karma: +374/-3456
Offline Offline

Posts: 3027



« Reply #1 on: January 08, 2020, 04:24:47 PM »

i have a gq-4x4 and i needed the adapter specific for that burner the cheap adapter i bought didnt work 
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
https://github.com/ugtuner05-sys
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)