Pages: [1]
Author Topic: Batronix Bagero II  (Read 2205 times)
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 122


« on: January 08, 2020, 02:24:50 PM »

Hi guys,
I strongly consider buying Bagero II for 28F102 programming (m3.8.2). I found offer for 249 euro but it's without DIP40 to PLCC44 adapter which I need. I've have found it on their website but it is quite expensive for adapter. Is this adapter the only one which will work? Or any simple china dip40 to plcc44 adapter will work? Thanks in advance
Logged
_nameless
Hero Member
*****

Karma: +320/-448
Offline Offline

Posts: 2672



« Reply #1 on: January 08, 2020, 04:24:47 PM »

i have a gq-4x4 and i needed the adapter specific for that burner the cheap adapter i bought didnt work 
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)