Pages: [1]
Author Topic: TP2.0 with OBDLink MX+  (Read 642 times)

Karma: +0/-0
Offline Offline

Posts: 2

« on: November 21, 2019, 02:14:03 PM »

I am trying to connect to ECU EDC16U1 on a bench using CAN, I set up the protocol with AT PB C001 and AT SP B but when I send a channel configuration request message, I receve NO DATA. It is interesting because I can sniff VCDS using the AT MA command and i see requests and responses. There is no problem when I use ISO 14230-4 KWP (fast initialization), AT SH 8010F1 and reading blocks 2101 etc. works fine. What am i doing wrong? Please help me.
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)