NefMoto > Technical > Tuning > 06A906018FC M3.8.x NA
Pages: [1] 2
« previous next »
Author Topic: 06A906018FC M3.8.x NA  (Read 8530 times)
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97
« on: January 19, 2020, 02:38:22 PM »
I am working on a naturally aspirated Audi A3 and we are going to mount turbo and big nozzles, I need to find the FGAT0, TLST and KHFM maps.

Can anyone help me with this?
Logged
prj
Hero Member
*****

Karma: +915/-428
Offline Offline

Posts: 5840
« Reply #1 on: January 20, 2020, 06:22:58 AM »
Use turbo ECU.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« Reply #2 on: January 20, 2020, 11:28:27 AM »
As this ECU uses a MAF sensor, I believe it is possible to scale the tables to work with turbo, I had the option of using the turbo engine ECU as a B plan.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #3 on: January 20, 2020, 12:18:27 PM »
Trust me, Ive done turbo conversion on NA ecu. In the end its better to use turbo ecu because the manufacturer has already done the things for you instead of you, and most likely they done it better than you can.

You need to spend loads of time searching for maps and etc, instead you could spend that time on actually tuning the car. The ECU's are very cheap either, get yourself a wiring diagram , add/move/remove the required wiring to match factory setup and you done. Its not just about underscaling the MAF.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #4 on: January 20, 2020, 02:03:06 PM »
I still don't understand why this bizarre notion that modifying an N/A ECU to be FI is easier than converting to another ECU persists.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #5 on: January 20, 2020, 02:10:08 PM »
Quote from: nyet on January 20, 2020, 02:03:06 PM
I still don't understand why this bizarre notion that modifying an N/A ECU to be FI is easier than converting to another ECU persists.


I understand it when there is no turbo ecu available for the engine/ platform but when there is one  then yea. The main thing I would guess based on my own experience is budget builds and lack of experience with parts compatibility/wiring.
Logged
_nameless
Hero Member
*****

Karma: +323/-450
Offline Offline

Posts: 2696
« Reply #6 on: January 20, 2020, 02:52:39 PM »
khfm is at 0x067A6
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
_nameless
Hero Member
*****

Karma: +323/-450
Offline Offline

Posts: 2696
« Reply #7 on: January 20, 2020, 02:56:58 PM »
tlst is at 0x067a6
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
_nameless
Hero Member
*****

Karma: +323/-450
Offline Offline

Posts: 2696
« Reply #8 on: January 20, 2020, 03:01:34 PM »
i think fgato is at  0x06770. sorry didnt spend too much time on it
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97
« Reply #9 on: January 20, 2020, 04:56:18 PM »
For my research KHFM = 0x67B8; TLST = 0x6752; FGAT0 = 0x67B9
You mentioned the same address for KHFM and TLST, which one is correct?

I have not ruled out the possibility of using a turbo ECU, but if I find these maps I will try to play with that ECU a little.
Logged
prj
Hero Member
*****

Karma: +915/-428
Offline Offline

Posts: 5840
« Reply #10 on: January 21, 2020, 08:17:59 AM »
For the final time, just use a turbo ECU...
You will have a full damos for that as well, and won't need to guess.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« Reply #11 on: January 21, 2020, 08:32:18 AM »
Yes, I have the DAMOS complete for the turbo ECU and several cars tuned with this ECU, I would like to offer a cheaper solution for those who install the 1.8T kit in 1.8 NA cars, in addition to the ECU you need to change the wiring and replace the MAF sensor, the MAF sensor ECU M3.8.3 (1.8T) is a rare piece in my country.
« Last Edit: January 21, 2020, 08:35:03 AM by tezotto » Logged
IamwhoIam
Hero Member
*****

Karma: +44/-101
Offline Offline

Posts: 1034
« Reply #12 on: January 21, 2020, 09:29:34 AM »
Go standalone then LOL
Logged
I have no logs because I have a boost gauge (makes things easier)
tezotto
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 10
« Reply #13 on: January 21, 2020, 09:51:09 AM »
Quote from: IamwhoIam on January 21, 2020, 09:29:34 AM
Go standalone then LOL

Thanks again for your comments, they are very constructive and contribute a lot to this forum !!!
Logged
prj
Hero Member
*****

Karma: +915/-428
Offline Offline

Posts: 5840
« Reply #14 on: January 21, 2020, 11:21:26 AM »
Quote from: tezotto on January 21, 2020, 08:32:18 AM
Yes, I have the DAMOS complete for the turbo ECU and several cars tuned with this ECU, I would like to offer a cheaper solution for those who install the 1.8T kit in 1.8 NA cars, in addition to the ECU you need to change the wiring and replace the MAF sensor, the MAF sensor ECU M3.8.3 (1.8T) is a rare piece in my country.

Cheaper solution? 1.8T KIT for car that is 25 years old?
Sorry, but my bullshit meter just went to maximum.

What is this fine country where there is a massive amount of 25 year old 1.8 NA cars, that people are driving and who for some reason have a ton of money to start tuning it?
Like, these things are worth 1-2k. You can probably sell it and buy for 1.5k-2.5k similar condition factory turbo car.

Person who is driving this old car does not have money to tune it for 2-3x the car value OR they are never going to be interested in tuning it, because car is only instrument to go from A to B.

WTF are you on about?

I just did a search on eBay, there's a ton of ECU's for 50$. M3.8.3 and M5.9.2.
« Last Edit: January 21, 2020, 11:24:38 AM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1] 2
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 27, 2024, 10:01:28 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)