Pages: [1]
Author Topic: KFMLDMN location for 8E0909018A  (Read 3500 times)
amerol0601
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« on: January 20, 2020, 09:13:20 AM »

So I have a fully defined KP for this, however the location of KFMLDMN is not correct. I have tried to find/figure it out by comparing to other similar files and XDF/KP etc to no avail. Was hoping someone could help me out with just the location. Thx.
Logged
amerol0601
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #1 on: January 20, 2020, 09:16:02 AM »

Also forgot to add location for KFMLDMX as well if possible
Logged
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« Reply #2 on: January 20, 2020, 05:38:09 PM »

Just take a look, MN is probably at 0x1E53C or E, MX is usualy below(some % axis is at 0x1E5CE), but area is slightly different, then two files i just try to compare with.
« Last Edit: January 20, 2020, 05:40:23 PM by curamrdan » Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: January 21, 2020, 01:29:27 AM »

I think this is it, ( don't bother with a first column  Cheesy )
Why do you need KFMLDMN?
Logged
amerol0601
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 24


« Reply #4 on: January 22, 2020, 06:11:30 AM »

I think this is it, ( don't bother with a first column  Cheesy )
Why do you need KFMLDMN?


I actually meant for MX originally, but MN was also wrong (but what I was looking at at the time so typed it instead.oops) so figured I would just ask for info on both if possible. There were other portions of the file that did not line up, but I was able to look at an AK file and get it squared. For some reason these eluded me, so will see how it goes. I appreciate the help!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0.009s, 0q)