Pages: [1]
Author Topic: 1.8t AFR maps - is it too rich?  (Read 2164 times)
nba
Jr. Member
**

Karma: +2/-3
Offline Offline

Posts: 33


« on: February 13, 2020, 03:15:03 PM »

Hi,
A3 1.8t AUM ~200 KM, downpipe 2,75". I wonder if I tuned the AFR maps correctly. TLAFA set to 0. DLBTS zeroed in the lower areas so that it is not too rich in BTS if the ECU uses this map. TABGBTS stock 400 degrees - is it ok or set it lower?
« Last Edit: February 13, 2020, 03:26:12 PM by nba » Logged
DonkeyDub
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 70


« Reply #1 on: February 27, 2020, 03:35:20 PM »

BTS purpose is component protection, ideal to keep it that way and
Use KR for fueling.

That Lamfa comes on very early..

Now the question, is it too rich?

Nobody knows because you didint post a log.
Nothing to go off except your target AFR which is a very small
Piece of the puzzle.

What else have you changed?


 





Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)